Bestway Lay-Z-Spa Accessories - 12 Filters And Chemical Starter Set

It is recommended to test your spa water at least 2-3 times per week, and more frequently during heavy use or periods of hot weather.

Use the test strips to determine your current pH level. If it's too low (acidic), add pH Plus gradually until the desired level (7.2-7.6) is reached. If it's too high (alkaline), add pH Minus gradually.

Filter cartridges should be rinsed regularly (every few days) and replaced approximately every 2-4 weeks, depending on usage and water conditions. The kit includes 12 cartridges, providing ample supply.

While the chemicals are standard spa treatment agents, the filters are specifically designed for Bestway Lay-Z-Spa models. It's always best to check compatibility with your specific spa brand.

Store all chemicals in their original containers, tightly sealed, in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children and pets.

Follow the dosage instructions on the chlorine granules packaging. The amount needed depends on your spa's water volume and the level of disinfection required, as indicated by your test strips.

Test and balance water chemistry (pH and chlorine). Clean or replace filter cartridges. Ensure the pump is running for adequate cycles.

Add a small amount of foam remover. Shock treat the spa with chlorine if necessary. Try to identify and eliminate the source of foaming (e.g., body lotions, hair products).

Add chlorine granules according to the dosage instructions based on your spa size. Ensure the test strips are not expired and are used correctly.

Clean or replace the filter cartridge. Ensure the filter housing is properly sealed and the pump is functioning correctly.