Autotek Rover Nightfire Red Fast Drying Aerosol Spray Paint - 300ml

This paint is an exact match for Rover 25, 100, 200, 400, 600, 800, MGF, Maestro, Metro, Mini, Montego & MG RV8 models manufactured between 1990 and 1999.

While not strictly mandatory, applying a primer (like Autotek Red Primer) is highly recommended for optimum adhesion and the best possible finish. Apply a minimum of two coats of primer.

The paint should be touch dry in 10-20 minutes after application. However, it requires a full 24 hours to cure completely.

Yes, the paint is suitable for application on rigid plastic surfaces, as well as metal and glass fibre.

The ideal temperature range for application is between 15°C and 25°C. Ensure good ventilation as well, preferably outdoors.

After each application, turn the can upside down and spray for 2-5 seconds. This clears any paint from the nozzle and prevents it from clogging.

Yes, it is compatible with nearly all automotive paint finishes, including cellulose. Ensure the existing paintwork is clean and in good condition.

Ensure the can is shaken adequately before and during use. Check the nozzle for blockages and clear if necessary. Try applying thinner coats from the recommended distance.

This usually occurs from applying paint too thickly or holding the can too close. Apply subsequent coats more thinly and from a greater distance. Allow adequate drying time between coats.

The surface was likely not properly cleaned or prepared. Ensure the surface is free from grease, wax, and rust. Consider applying a suitable primer for better adhesion.

Verify that you have selected the correct paint code (C0Q) for your vehicle's year and model. Ensure the original paint has not faded significantly, which may require professional color matching or blending.