Best current price£9.29from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£9.29Visit shop Prowarm Ultra Prime Surface Conditioner 0.5L
Visit shop
B&Q£10.21Visit shop B&Q - Ultra Prime Surface Conditioner
Visit shop2 offers from £9.29 - £10.21
View price history by clicking the chart icon.
The ProWarm Ultra Prime Surface Conditioner is an acrylic-based primer designed for porous building substrates like plaster, timber, and brick. It offers a significant benefit by increasing bond strength and improving water resistance for subsequent coatings. A key consideration is its limited shelf life of 6 months. This versatile conditioner primes, seals, and enhances the durability and flexibility of surfaces, preparing them effectively for various finishes.
| Brand | ProWarm |
|---|
It is suitable for porous building substrates such as plaster, timber, brick, and block work.
A 1-litre container will cover up to 14m² per coat, depending on the porosity of the substrate.
The average drying time is approximately 30 minutes to an hour, but this can vary depending on the ambient temperature and humidity.
It is designed for porous substrates. If the painted surface is sound and porous, it may be suitable, but testing in an inconspicuous area is recommended. It's primarily for unpainted, porous materials.
Store in airtight containers between 5°C and 30°C. It is crucial to protect the product from frost.
The shelf life is 6 months when stored correctly in airtight containers between 5°C and 30°C and protected from frost.
Tools and equipment should be cleaned with water immediately after use, before the product dries.
Ensure the product has been stored within the recommended temperature range (5°C - 30°C). Do not dilute unless specified for a particular application by a professional.
The substrate may be highly porous, requiring a second coat after the first has dried. Ensure full coverage during application.
Verify that the surface was clean and dry before application and that the Ultra Prime was fully dry before applying the next layer. Ensure the substrate is porous.
This can happen if the container was not properly sealed. Ensure lids are tightly closed after each use. If significantly dried, the product may no longer be usable.
Setup: Ensure the substrate is clean, dry, and free from dust, grease, or any loose material before application. Apply using a brush or roller. Ensure adequate ventilation during application.
Compatibility: Primarily designed for porous building substrates including plaster, timber, brick, and block work. Not recommended for non-porous surfaces.
Care & Storage: Store in original, airtight containers between 5°C and 30°C. Protect from frost. Once opened, use within the specified shelf life. Clean tools and equipment with water immediately after use.
