Plumbright Endfeed Fitting Reducer - 35 x 28mm
Best current price£4.66from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£4.66Visit shop Plumbright Endfeed Fitting Reducer 35 X 28Mm 30012444
Visit shopCity Plumbing GB£4.66Visit shop One Offer
1 offer from £4.66
View price history by clicking the chart icon.
City Plumbing GBPlumbright Endfeed Fitting Reducer 35 X 28Mm 30012444
Free delivery in 1–3 days
£4.66
Visit shop
Product Information
Full details
This guide is for plumbers and DIY enthusiasts working with domestic water and gas systems. The Plumbright Endfeed Fitting Reducer offers a reliable and cost-effective way to connect copper pipes of different sizes, ensuring a neat and secure joint. A key consideration is that it requires soldering for installation, necessitating appropriate tools and safety precautions.
All features
| Model Part Number | 30012444 |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
What type of solder should I use?
For potable water systems, use lead-free solder specifically designed for plumbing applications. For gas lines, consult local regulations for approved solder types.
Can I use this fitting for high-pressure systems?
This fitting is rated for low-pressure domestic gas and standard hot and cold water systems. It is not intended for high-pressure industrial applications. Always check system pressure ratings against fitting specifications.
How do I clean the copper pipes before soldering?
Use a pipe cleaning brush or emery cloth to remove any dirt, oxidation, or scale from the outside of the pipe and the inside of the fitting socket. The surfaces must be bright and clean for a good solder joint.
What does 'End Feed' mean?
'End Feed' refers to the method of joining pipes where the solder is fed into the joint externally, and capillary action draws it into the space between the pipe and the fitting.
Is this fitting suitable for outdoor use?
While copper is generally corrosion-resistant, it can still be affected by environmental factors. Ensure proper installation and consider protection if the joint will be exposed to harsh conditions.
What is the Kitemark certification?
The Kitemark is a voluntary British certification mark that indicates a product has been independently tested and certified to meet specific British Standards, ensuring quality and safety.
What is WRAS approval?
WRAS (Water Regulations Advisory Scheme) approval means the product has been assessed and complies with the Water Supply (Water Fittings) Regulations 1999 in England and Wales, ensuring it is safe for use in contact with drinking water.
Troubleshooting
Fitting will not accept solder
Ensure pipes and fitting are clean and fluxed. Reheat the joint evenly. Check that the pipe is fully inserted into the fitting. Ensure adequate solder is being applied.
Leak after soldering
The joint was likely not heated sufficiently or solder did not fully penetrate. The joint may need to be drained, heated, and re-soldered. Ensure the correct flux and solder are used.
Fitting is discolored or shows signs of corrosion
This could indicate incompatible water conditions or a manufacturing defect. Contact the supplier if this is observed before installation. Ensure proper soldering techniques are used to avoid overheating, which can damage the fitting.
Pros and Cons
Pros
- Meets stringent industry standards (EN1254-1, Kitemark, WRAS).
- Durable copper construction ensures a long service life.
- Suitable for both gas and water applications.
- Provides a secure and leak-free joint when properly installed.
- Cost-effective method for connecting pipes of different diameters.
Cons
- Requires soldering skills and equipment.
- Installation can be time-consuming compared to push-fit alternatives.
- Not suitable for solvent-weld or compression jointing methods.
- Potential for damage if overheated during soldering.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure both the 35mm and 28mm copper pipes are clean, dry, and free from oxidation. Use abrasive cloth or emery paper to clean the outside of the pipes and the inside of the fitting.
- Deburring: Remove any burrs from the ends of the pipes.
- Flux Application: Apply a thin, even layer of appropriate flux to the cleaned surfaces of both the pipes and the inside of the fitting.
- Assembly: Insert the pipes fully into the fitting.
- Heating: Heat the joint evenly with a blowtorch, focusing on the pipe rather than the fitting. The heat should draw the solder into the joint.
- Soldering: Apply lead-free solder wire to the joint seam opposite the heat source. The solder should melt and be drawn into the fitting via capillary action. Continue heating and feeding solder until a complete fillet is visible around the entire seam.
- Cooling: Allow the joint to cool naturally without disturbing it.
Compatibility:
- This fitting is designed for use with copper pipe conforming to relevant British Standards.
- Suitable for hot and cold water systems and low-pressure domestic gas installations.
- Requires lead-free solder wire and appropriate flux for potable water systems.
Care:
- Once installed, end feed fittings require no specific ongoing care beyond regular system maintenance.
- Avoid physical stress on the joint during installation and operation.
- Periodically check the overall plumbing system for any signs of leaks or corrosion.