Osmo Flat Brush - 25mm

Immediately after use, wipe off excess product. Then, clean the bristles thoroughly with Osmo Brush Cleaner or a suitable solvent like white spirit. Rinse and allow to air dry.

This brush is specifically designed for Osmo oils and stains. While it might be used with some water-based finishes, performance is optimized for oil-based products.

With proper care and regular cleaning, the Osmo Flat Brush can last for a significant number of projects, maintaining its performance for applying Osmo finishes.

The soft tip helps to distribute the oil or stain smoothly and evenly, minimizing the risk of brush marks or streaks for a professional-looking finish.

No, the 25mm width is ideal for smaller surfaces and detailed work. For large floor areas, a wider brush or applicator roller designed for flooring would be more appropriate.

No, never store the brush wet. Ensure it is thoroughly cleaned, reshaped, and completely dry before storing to prevent bristle damage and mold.

Ensure all product residue has been removed. Use a comb to gently detangle bristles after cleaning and before drying. Avoid using harsh detergents that can damage natural bristles.

Ensure the brush is properly loaded with finish and that you are applying with the grain. Check if the brush is clean and free from dried product. For large areas, consider a wider brush for more efficient application.

This can occur with new brushes. Gently flick the brush before use to remove loose bristles. Ensure the ferrule (metal part) is secure. If shedding persists, contact customer support.