Best current price£26.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£26.00Visit shop National Skirting White Square Primed Skirting Board 18Mm 95 X 4200Mm
Visit shop3 offers from £26.00
View price history by clicking the chart icon.
The National Skirting Square Primed MDF Skirting Board is ideal for homeowners and renovators seeking a clean, modern finish to protect wall bases and hide floor expansion gaps. Measuring 18mm by 95mm with a 4.2-meter length, this board offers a consistent, high-quality profile that works well in both contemporary and traditional interiors. While it comes pre-primed in white, users should note that a topcoat of paint or gloss is required to achieve the final desired aesthetic and ensure long-term durability against scuffs and moisture.
| Colour | White |
|---|---|
| Series | Square Primed |
| Brand | National Skirting |
MDF is not water-resistant. While it can be used in bathrooms if the edges and surfaces are thoroughly sealed with high-quality gloss or lacquer, it is generally recommended to use PVC or solid timber in high-moisture areas.
Because the board comes pre-primed, you can use standard interior wood paints, including acrylic, oil-based, or water-based gloss and satin finishes.
Yes, but ensure you countersink the screw heads so they can be filled with wood filler and sanded smooth before painting.
No, fixings such as adhesive and nails are not included and should be purchased separately based on your specific wall type.
A mitre saw (manual or electric) is the best tool for achieving accurate corner joints, especially for 45-degree angle cuts.
Two topcoats are typically recommended to ensure uniform color and adequate protection for the primer.
Ensure the wall surface is level; use additional adhesive or wall plugs to draw the board flush against the wall.
Lightly sand the pre-primed surface with fine-grit sandpaper (240 grit) to provide 'tooth' for the topcoat to grip.
Use a specialized decorators caulk or wood filler to bridge small gaps, then touch up with paint for a seamless appearance.
Installation requires standard carpentry tools such as a mitre saw for corner cuts, high-quality adhesive, and finishing nails. Before installation, it is recommended to acclimatize the boards in the room for 24 hours. Ensure that walls are dry and free from dust. For the best result, use a high-quality wood adhesive along the back of the board, supplemented by nails or screws into wall studs. Once installed, fill any nail holes with high-quality wood filler, sand lightly, and apply at least two coats of your chosen topcoat. To maintain the boards, simply wipe them down with a slightly damp cloth to remove dust. Avoid excessive water contact, especially near floor-level spills, as moisture can cause the MDF core to swell if the paint barrier is breached.
