Best current price£6.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£6.99Visit shop Hycote Beige Ford Sierra Double Acrylic Spray Paint 150Ml
Visit shop5 offers from £6.99 - £50.99
View price history by clicking the chart icon.
The Hycote Double Acrylic Paint in Ford Sierra Beige is ideal for automotive enthusiasts and DIY restorers looking for a precise, factory-matched finish on Ford vehicles. Its standout benefit is the high-concentration formula that provides double the coverage of standard aerosols, though users should note that as a fast-drying acrylic, precise application technique is required to prevent runs or uneven textures on larger panels.
| Model Part Number | XDFD112 |
|---|---|
| Brand | Hycote |
Yes, it is designed to be compatible with OEM, acrylic, and cellulosic finishes used on Ford vehicles.
Yes, it adheres well to plastic surfaces, though a plastic primer is recommended for maximum long-term adhesion.
Due to the fast-drying formula, wait 10-15 minutes between coats depending on the ambient temperature.
While the paint is durable, applying a clear lacquer over the top will provide additional gloss and chemical resistance.
150ml is generally intended for small touch-ups, chips, and trim. A full panel would likely require multiple cans.
Yes, the paint works well on wood surfaces provided the wood is properly sanded and sealed with a primer first.
You are holding the can too close to the surface or applying the coat too heavily. Move further back and apply thinner, lighter dust coats.
Remove the nozzle and soak it in a small amount of cellulose thinner, or replace it if the clog persists.
The paint is drying before it hits the surface. Increase your spray speed or move slightly closer to the object.
To achieve professional results, ensure the target surface is thoroughly cleaned, degreased, and sanded with fine-grit abrasive paper to promote adhesion. Always shake the can vigorously for at least two minutes before spraying to ensure the pigments are correctly suspended. Since this product is compatible with OEM and acrylic finishes, it acts as a reliable overcoat. After use, clear the nozzle by turning the can upside down and spraying for three seconds to prevent clogging. Store the canister in a cool, dry place away from direct sunlight to maintain the integrity of the propellant.
