Best current price£256.91from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£256.91Visit shop Siemens Et 200Sp Cm 4X Io-Link St Communication Module - 6Es71376bd000ba0
Visit shop2 offers from £256.91 - £591.84
View price history by clicking the chart icon.
The Siemens SIMATIC ET 200SP CM 6ES7137-6BD00-0BA0 is a communication module designed for distributed I/O systems, offering robust IO-Link Master V1.1 functionality. It is ideal for industrial automation engineers and system integrators seeking flexible and reliable communication solutions. A key benefit is its seamless integration with MultiFieldbus interface IM155-6MF, supporting various Ethernet protocols. One caveat is its IP20 rating, requiring installation in a control box for protection against environmental factors.
| Brand | Siemens |
|---|
Its primary function is to act as an IO-Link Master (V1.1), enabling communication between intelligent IO-Link devices and a PLC within the ET 200SP distributed I/O system.
The IP20 rating means the module is protected against solid objects larger than 12.5 mm (like fingers) but offers no protection against water. It must be installed in a control cabinet or enclosure to protect it from dust and moisture.
While the module is part of the Siemens ecosystem, its compatibility with non-Siemens PLCs depends on the PLC's ability to support the ET 200SP I/O system and the communication protocols (PROFIBUS/PROFINET) used with the MultiFieldbus interface.
Multi hot-swapping allows you to remove or insert modules while the system is running, without needing to power down the entire system. This significantly reduces planned downtime for maintenance or expansion.
The module requires a DC supply voltage ranging from 19.2V to 28.8V.
This module is specifically designed for IO-Link communication. To connect standard sensors, you would typically need a different type of I/O module within the ET 200SP system.
Verify the backplane connection, ensure the module is correctly seated, and check the power supply. Confirm correct device configuration in the PLC software.
Check the IO-Link cable connection, ensure the connected device is powered and functional, and verify that the IO-Link master configuration in the PLC software matches the connected device's parameters.
Ensure adequate ventilation within the control cabinet and check that the supply voltage is within the specified range (19.2 - 28.8V DC). Avoid overloading the module.
Inspect all wiring for loose connections or damage. Verify that the module and connected devices are within their operating temperature range. Consider potential electromagnetic interference and shielded cabling.
Setup:
Compatibility:
Care:
