Ellsi Bath Screen Seal - 6mm Glass

The primary purpose is to create a watertight seal along the bottom edge of a 6mm glass shower screen or bath enclosure, preventing water from leaking onto the bathroom floor.

This seal is specifically designed for glass panels that are 6mm thick.

Clean the glass edge, then slide the seal onto the bottom edge of the 6mm glass. For precise fitting, you can trim it with a sharp knife.

While primarily designed for the bottom edge, it may be used on side edges if there is a compatible surface for it to seal against and the glass is 6mm thick.

With regular cleaning and care, the durable PVC material should provide effective sealing for a significant period. However, like all seals, it will eventually wear and may need replacement.

This seal is designed for 6mm glass. Using it on glass of a different thickness may result in a poor seal or difficulty in installation. It is recommended to measure your glass accurately.

Clean the seal with a soft cloth and mild soapy water. Avoid using abrasive cleaners or solvents, which can damage the material.

Ensure your glass is exactly 6mm thick. If slightly loose, you might need to add a bead of silicone sealant on the inside for a more permanent fix. If too tight, check for debris on the glass edge.

Verify the seal is correctly positioned and making full contact with both the glass and the shower tray/bath. Check for any kinks or damage in the seal. Ensure the glass thickness is indeed 6mm.

This is usually temporary. Clean the shower tray with a non-abrasive bathroom cleaner. Ensure the seal is kept clean to prevent residue buildup.