Best current price£22.38from eBay
Shopping.co.uk recommended and popular offers
eBay£22.38Visit shop Rupes BigFoot Uno Pure Compound Polish 250ml with 100mm UltraFine Foam DA100S
Visit shop2 offers from £22.38 - £24.60
View price history by clicking the chart icon.
The Rupes BigFoot Uno Pure Compound Polish is designed for professional detailers and automotive enthusiasts who demand an ultra-high gloss finish on clear coat surfaces. By pairing a specialized finishing compound with an ultra-fine foam pad, this kit enables users to refine paintwork and achieve maximum clarity, though it is not intended for the removal of deep scratches or heavy oxidation.
| Model Part Number | DA100S |
|---|---|
| Brand | RUPES |
Uno Pure is primarily a finishing polish. While it can improve gloss on relatively clean paint, it does not have the cutting ability to remove significant swirls.
Yes, it is safe for use on all factory-cured clear coat systems and automotive paint finishes.
The polish will turn from an opaque cream to a translucent, oily film, indicating that the abrasive particles have broken down and it is time to wipe off.
While it is optimized for dual-action machines, it can be used with rotary polishers at lower speeds, though dual-action is recommended for the best finish.
Uno Pure is designed to be a pure abrasive polish without fillers, ensuring that the finish you see is the true state of the paint.
Reduce the working area size or apply a slightly larger amount of polish to the pad to maintain lubrication.
You are likely using too much product. Reduce the number of drops applied to the pad during each set.
Clean the pad with compressed air or a specialized pad brush, or switch to a fresh, dry pad to maintain consistent cutting performance.
To prepare for use, ensure the vehicle surface is thoroughly cleaned and decontaminated using a clay bar or iron remover. Attach the 100mm UltraFine pad to your backing plate, ensuring it is centered. Apply 3-4 pea-sized drops of compound to the pad. When polishing, work in a 2x2 foot section using overlapping passes. After finishing, clean the foam pad immediately using warm water and a pad cleaner to prevent the compound from drying inside the foam cells, which can harden and degrade the pad performance over time. Store the bottle in a cool, dry place away from direct sunlight.
