Best current price£65.50from eBay
Shopping.co.uk recommended and popular offers
eBay£65.50Visit shop 6 x Indasa White One Pack High Build Acrylic Based Primer 500ml Aerosol
Visit shop2 offers from £65.50 - £70.80
View price history by clicking the chart icon.
The Indasa High Build Acrylic Spray Gun Finish is an ideal solution for professional body shop technicians and DIY automotive enthusiasts who require a reliable, easy-to-apply primer for surface preparation. Its primary benefit is the combination of high-fill capabilities and excellent adhesion, which ensures a smooth, professional-grade base for subsequent topcoats. While highly effective, users should note that as a one-pack aerosol system, it is best suited for small to medium-sized repairs rather than full-vehicle resprays.
| Colour | White |
|---|---|
| Model Part Number | HB Acrylic Spray Gun Finish White x6 Adhesion |
| Brand | Indasa |
Yes, provided the surface is properly cleaned and primed with an appropriate plastic adhesion promoter first.
While it is touch-dry quickly, it is best to wait at least 30-60 minutes depending on ambient temperature before wet or dry sanding.
It acts as both, providing a high-build layer that is specifically designed to be sanded to a smooth finish.
Yes, this is a primer intended as a base layer and must be protected by a suitable automotive topcoat or clear coat.
For best performance, apply in an environment between 15°C and 25°C with low humidity.
Remove the nozzle and soak it in a small amount of lacquer thinner, then clear the orifice with a thin wire.
Ensure you are using a lighter touch and maintaining a consistent distance; avoid applying too much product in a single pass.
Re-check that the substrate was properly degreased and sanded with an appropriate grit before application.
Before application, ensure the surface is thoroughly cleaned with a degreaser to remove wax, silicone, or oil. Sand the repair area with P320-P400 grit sandpaper to create a mechanical key for the primer. Shake the aerosol can vigorously for at least two minutes until the mixing ball rattles freely.
Maintain a distance of 15 to 25 cm from the surface while spraying. After use, invert the can and spray for a few seconds to clear the nozzle, which prevents the internal dip tube from clogging. Store the cans in a cool, dry place away from direct sunlight to maintain the integrity of the acrylic resin.
