Compatible for Honda 2000 - 2009 S2000 Roadster 2.0/2.2L Coilover Suspension Kit - MXR - MXR-SLC

The MXR-SLC kit comes with a balanced spring rate of 10 kg/mm (560 lbs/in) front and rear, which is suitable for a blend of sporty performance and street comfort.

No, these coilovers use standard rubber top mounts and do not include adjustable camber plates. Camber adjustments would require additional aftermarket components.

The MXR-SLC coilovers allow for a lowering range of 1 to 3 inches from the stock ride height.

Damping is adjusted via a knob located on the top of the coilover unit (usually accessible after removing the strut tower brace). There are 24 distinct levels of adjustment available.

While they offer significant adjustability for improved performance, the lack of adjustable camber plates may limit optimal track alignment. They are primarily designed for street use with enhanced sporty characteristics.

Warranty information is typically provided by the retailer. Please refer to your purchase documentation or contact the seller for details regarding the warranty policy.

The complete coilover suspension kit weighs approximately 21.98 kg (48.45 lbs).

Ensure all mounting hardware is tightened to the correct torque specifications. Check that springs are seated correctly and that no components are loose. Verify that the damping adjustment knob is securely in place.

Confirm that the height adjustment collars are set to the same position on both sides of the axle. Re-check all locking rings and ensure they are securely fastened.

Verify spring preload is set within the recommended range (7-10 mm). Ensure the damping adjustment knob is functioning correctly and not stuck. Consider if the chosen damping setting is appropriate for the road conditions.

Inspect the shock body and seals for any signs of damage or leakage. If a leak is confirmed, the affected coilover may need to be serviced or replaced. Contact customer support for assistance.