Best current price£20.61from B&Q
Shopping.co.uk recommended and popular offers
B&Q£20.61Visit shop B&Q - Crystal Clear Epoxy Adhesive 2 X 15Ml Tubes (2 Packs)Strong 2-Part Glue For GlassJewellery & Ceramics
Visit shop2 offers from £20.61
View price history by clicking the chart icon.
This guide is for DIY enthusiasts, crafters, and anyone needing durable, clear repairs. The Araldite Crystal Clear Epoxy Adhesive offers a strong, long-lasting bond with an invisible finish, perfect for visible repairs. A potential caveat is that it requires precise mixing of two components, which may take practice for beginners.
| Colour | White |
|---|---|
| Brand | Araldite |
Unopened tubes, stored correctly in a cool, dry place, typically have a shelf life of 2-3 years. Once mixed, the working life is very short, and it cannot be stored.
Araldite Crystal Clear Epoxy typically achieves handling strength in about 1 hour and full cure in 12-24 hours. This can vary depending on temperature and humidity.
This epoxy creates a rigid bond and is not recommended for flexible plastics like polyethylene or polypropylene. For flexible materials, a different type of adhesive might be more suitable.
The working time, or pot life, after mixing the resin and hardener is typically around 5 minutes. It's important to mix only what you can use within this time frame.
Uncured adhesive can usually be wiped away with a damp cloth or cleaned with an appropriate solvent, such as methylated spirits or acetone, depending on the surface. Always test the solvent on an inconspicuous area first.
Yes, once fully cured, Araldite Crystal Clear Epoxy Adhesive is generally waterproof and resistant to many common chemicals, making it suitable for various applications.
Each pack contains two 15ml tubes (resin and hardener), totaling 30ml per pack. Since this is a 2-pack offer, you receive a total of 60ml of adhesive (4 tubes).
Ensure equal parts of resin and hardener were used and mixed thoroughly for the correct duration. Check that the components were not past their expiry date and were stored correctly. Temperature and humidity can affect cure times; ensure working conditions are within the recommended range.
Verify that surfaces were properly prepared (clean, dry, and possibly abraded). Ensure sufficient adhesive was applied and surfaces were held together correctly during the handling time. Check for compatibility issues with the materials being bonded.
Ensure no excess material is left in the tubes and that both resin and hardener are dispensed evenly. Use a flat, clean surface for mixing and a suitable tool.
This can occur if the two parts were not mixed thoroughly or if moisture was present during application or curing. Ensure a uniform mix and a dry environment for optimal clarity.
Setup:
Compatibility:
This adhesive is compatible with glass, ceramics, metal, wood, concrete, leather, rubber, and many plastics (excluding polyethylene, PTFE, and nylon). Always test on an inconspicuous area of plastics if unsure.
Care:
Store unused tubes tightly capped in a cool, dry place away from direct sunlight. Clean up any uncured adhesive residue with a damp cloth or appropriate solvent (refer to product packaging for specific recommendations). Once cured, the adhesive is generally resistant to water and many common chemicals.
