Shopping.co.uk

Hobbywing Seaking 60A V3.1 Speed Controller - HW30302200

Hobbywing Seaking 60A V3.1 Speed Controller - HW30302200

Built with high-quality components and coupled with cutting-edge firmware, the Seaking V3.1 is unm...

Best current price£73.16from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£73.16Visit shop

Hobbywing HW30302200 Seaking Boat Regulator 60A V3.1 Navy Esc 3A 2-3s V3

Visit shop

One Offer

1 offer from £73.16

View price history by clicking the chart icon.

eBayHobbywing HW30302200 Seaking Boat Regulator 60A V3.1 Navy Esc 3A 2-3s V3
£20.72 delivery
£73.16
Visit shop

Product Information

Full details

This guide is for RC boat enthusiasts seeking reliable and high-performance electronic speed control. The Seaking V3.1 ESC offers superior cooling and multiple safety features, ensuring consistent operation for your model boat. A potential consideration is its specific application for boats, which might limit its use in other RC hobby applications.

All features

Model Part NumberHW30302200
BrandHobbywing

Extended Product Information

FAQs

What is the maximum voltage this ESC can handle?

The Seaking V3.1 ESC is designed to work with specific LiPo battery configurations. Please refer to the product's technical specifications for the exact supported voltage range (e.g., 2S-3S LiPo).

Do I need a separate BEC?

No, the Seaking V3.1 ESC has a built-in BEC that provides a 6V output with 3A continuous current, suitable for powering your receiver and servos.

How do I program the ESC?

Programming can typically be done using a compatible LCD programming box or through the transmitter (check manual for specific procedures). The ESC features a separate PRG/FAN port for this purpose.

Is this ESC suitable for electric cars or planes?

This ESC is specifically designed and optimized for RC boat applications due to its cooling system and firmware characteristics. It is not recommended for use in cars or planes.

How effective is the water cooling?

The integrated water cooling system, featuring a copper bar and aluminum heatsink, is highly effective at dissipating heat, allowing the ESC to run cooler and more reliably under load.

What is the warranty period for this ESC?

Warranty information is typically provided by the retailer or manufacturer. Please consult the product packaging or the Hobbywing website for the most accurate warranty details.

Can I use this ESC with a sensored brushless motor?

Yes, the Seaking V3.1 ESC is compatible with both sensored and sensorless brushless motors.

Troubleshooting

Motor does not spin

Check battery connection, ensure ESC is powered on, verify motor and ESC connections, check throttle calibration, and ensure the motor KV is compatible.

Motor spins in the wrong direction

Swap any two of the three wires between the ESC and the motor.

ESC shuts down unexpectedly

Check for low-voltage cutoff activation (battery too low), overheating (ensure water cooling is effective and unobstructed), or throttle signal loss. Allow the ESC to cool down before restarting.

Poor throttle response or erratic motor behavior

Recalibrate the throttle channel on your transmitter. Ensure no interference with the signal wire connection to the receiver. Check ESC settings if programmable.

Water cooling system is not circulating water

Verify water pickup is submerged and not blocked. Check for kinks or blockages in the water tubes. Ensure the water pump is functioning correctly (if applicable).

Pros and Cons

Pros

  • Excellent heat dissipation due to integrated water cooling.
  • Robust safety features protect against common operational hazards.
  • Waterproof design enhances durability in marine environments.
  • Reliable performance with high-quality internal components.
  • Integrated BEC simplifies wiring and power management.

Cons

  • Primarily designed for boat applications, may require specific setup for other uses.
  • Water cooling setup is necessary for optimal performance, adding complexity.
  • Programming may require additional accessories for advanced adjustments.

Setup, Compatibility & Care

Setup:

  1. Connect Power: Ensure the ESC is connected to a compatible LiPo battery (check specifications for voltage range) using appropriate connectors.
  2. Motor Connection: Connect the three output wires from the ESC to the three brushless motor wires. The order may affect direction; if the motor spins the wrong way, swap any two of these wires.
  3. Receiver Connection: Plug the ESC's signal wire into the throttle channel of your RC receiver.
  4. Water Cooling: Attach the water cooling tubes to the ESC's inlet and outlet fittings. Connect the inlet to a water pickup and run the outlet to a water exit point on your boat.
  5. Programming: Use the separate PRG/FAN port for programming ESC parameters with a compatible programmer (sold separately) or via the transmitter.

Compatibility:

  • Motor: Compatible with sensored and sensorless brushless motors. Ensure motor KV rating is within ESC limits for the battery voltage used.
  • Battery: Supports LiPo batteries; refer to the product specifications for the acceptable cell count range (e.g., 2S-3S LiPo).
  • Application: Designed specifically for RC boats.

Care:

  • After each use, especially in saltwater, rinse the ESC and water cooling system with fresh water.
  • Ensure water cooling tubes are clear of debris and the water pump (if external) is functioning correctly.
  • Store the ESC in a dry place when not in use.
  • Periodically check for any signs of corrosion or damage.

Price History

DatePrice
Visit shop