Best current price£27.79from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£27.79Visit shop Legrand White Lcs² Data System Data Socket Twisted Pair - 076506
Visit shop1 offer from £27.79
View price history by clicking the chart icon.
This Legrand LCS² data socket (model 076506) is designed for installers and IT professionals seeking a reliable Cat6 twisted pair data connection point. Its key benefit is providing a flush-mounted, integrated solution for structured cabling systems. A potential caveat is its requirement for specific Legrand Mosaic system components for full integration.
| Model Part Number | 076506 |
|---|---|
| Brand | Legrand |
This socket is designed for twisted pair data cables, specifically supporting Category 6 (Cat6) performance for high-speed networking.
No, the socket has an IP20 protection rating, which means it is protected against solid objects larger than 12.5mm but offers no protection against water. It is intended for indoor use in dry environments.
IDC stands for Insulation Displacement Connector. It's a type of electrical connector that pierces the wire's insulation to establish a connection, typically used for terminating network cables without the need for stripping wires or soldering.
While you can physically connect a Cat5e cable, you will be limited to Cat5e performance speeds and capabilities. For optimal performance, it is recommended to use Cat6 cables.
This data socket is designed to accommodate 2 modules within the Legrand Mosaic system, suitable for one RJ45 data connection.
The socket is designed to fit into a 2-module space within the Legrand Mosaic system. Specific dimensions would depend on the overall Mosaic plate and frame used.
The product information specifies the data socket itself. Mounting plates and back boxes are typically sold separately as part of the Legrand Mosaic system.
Verify that all 8 wires are correctly terminated in the IDC connectors on both ends of the cable run. Ensure the cable is properly seated and the IDC mechanism has cut through the insulation. Double-check the wiring standard (T568A/B) used at both the socket and the patch panel/other end.
Check for potential cable damage or kinks. Ensure the cable used is indeed Category 6 rated and not exceeding the maximum recommended length (typically 100 meters). Verify that the termination points are secure and there are no shorts or crosstalk issues between wire pairs. Clean the RJ45 port if any debris is present.
Confirm that the socket is compatible with the specific Legrand Mosaic mounting frame or back box being used. Ensure the mounting frame is correctly installed and secured to the wall or surface.
Setup: This data socket is designed for flush mounting within the Legrand Mosaic system. Installation involves securing the socket into a compatible Mosaic back box or modular frame. Terminate the twisted pair cables using the IDC (Insulation Displacement Connector) slots provided. Ensure correct pairing of wires according to T568A or T568B standards.
Compatibility: Primarily compatible with the Legrand Mosaic modular system. Ensure the installation environment supports flush mounting and has adequate space for the socket and cabling.
Care: To clean, disconnect any network cables. Use a dry or slightly damp, soft cloth to wipe the surface. Avoid using abrasive cleaners or solvents, as they can damage the plastic casing and internal components. Ensure the socket is protected from excessive dust and moisture.
