Best current price£13.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop B&Q - Ep2 Lithium Grease Lubricant Extreme Performance Cartridge 500G X2
Visit shop3 offers from £13.99 - £14.99
View price history by clicking the chart icon.
This Carlube Lithium EP2 Grease is designed for automotive and industrial ball and roller bearing applications requiring a high melting point, smooth, multi-purpose grease. Its key benefit is providing excellent extreme pressure (EP) performance and protection against shock loading and high pressures or temperatures, while a potential caveat is its specific temperature range limitations (-15 C to 120 C). Key features include high resistance to oxidation and water washout, good EP performance, prevention of disc brake squeal, and suitability for NLGI 2 Lithium Grease applications.
| Model Part Number | XGE400 |
|---|---|
| Brand | Carlube |
'EP' stands for Extreme Pressure, indicating the grease contains additives to protect components under high load conditions. '2' refers to its NLGI (National Lubricating Grease Institute) consistency grade, which is a medium-thick grease.
It is specifically recommended for automotive and industrial ball, roller, or plain bearings, especially those experiencing high loads, shock loading, or high pressures. It's most suitable where an NLGI 2 Lithium Grease is specified.
The operating temperature range for Carlube Lithium EP2 Grease is from -15°C to 120°C.
The re-lubrication interval depends on the application, operating conditions (load, speed, temperature, environment), and component type. Consult the equipment manufacturer's recommendations or a lubrication guide for specific intervals.
While it offers excellent EP properties, its suitability for very high-speed applications depends on the specific bearing type and operating conditions. For high-speed bearings, greases with lower base oil viscosity might be preferred. Always consult the bearing manufacturer's recommendations.
Yes, this 500g cartridge is designed to fit standard manual grease guns that accept 500g cartridges.
Resistance to water washout means the grease is less likely to be displaced or emulsified by water, ensuring it remains in place to provide continuous lubrication even in wet or wash-down environments.
Ensure the cartridge is correctly seated in the gun, the follower rod is fully retracted, and any air has been purged. Check for blockages in the gun or nozzle.
While rated for -15°C, extremely low temperatures can increase viscosity. Allow the grease and equipment to warm slightly if possible. Ensure the grease gun is functioning correctly at lower temperatures.
Ensure the grease was applied to the correct areas (e.g., back of brake pads, caliper pins) and not the friction surfaces. Re-apply if necessary, ensuring thorough cleaning first. Consult a professional if the issue continues.
Verify that the operating temperature and load conditions do not exceed the grease's capabilities. Ensure the correct amount of grease was applied and that no contamination has occurred.
Setup:
This product is typically supplied in a 500g cartridge designed for use with standard grease guns. Ensure your grease gun is compatible with standard 500g cartridges. Clean the application point thoroughly before applying grease to remove old grease, dirt, and debris. Insert the cartridge into the grease gun and purge any air before use.
Compatibility:
Carlube Lithium EP2 Grease is generally compatible with other lithium-based greases of similar NLGI consistency. However, when switching from a different type of grease, it is best practice to clean out the old grease thoroughly to avoid potential incompatibilities. It is recommended for applications requiring an NLGI 2 Lithium Grease.
Care:
Store the grease cartridges in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the cartridge sealed when not in use to prevent contamination. Regularly inspect lubricated components for signs of wear or lubricant degradation. Clean any excess grease from around the application point with a clean cloth.
