XL Joinery Internal Verona Oak Obscure Glass Door - 1981 X 838 X 35mm (33")
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and builders seeking a stylish and functional interior door. The XL Joinery Verona door offers a blend of natural light and privacy with its obscure glass and attractive arched design, providing a consistent aesthetic across a property when paired with matching doors. A key consideration is that the door is supplied unfinished, requiring painting or staining before installation.
All features
| Colour | Brown |
|---|---|
| Model Part Number | 1981 X 838 X 35mm (33") |
| Brand | XL Joinery |
Extended Product Information
FAQs
What is the main benefit of the Verona door's obscure glass?
The obscure glass allows natural light to flow between rooms while providing a degree of privacy, preventing clear visibility.
Does the door come pre-finished?
No, the door is supplied unfinished and is ready to be painted or stained to match your desired interior decor.
Can I use this door for external applications?
No, this door is designed specifically for internal use within a property.
What are the exact dimensions of this door?
The dimensions are 1981mm in height, 838mm in width, and 35mm in thickness.
Can I buy matching doors for other rooms?
Yes, the Verona range includes fellow panelled and fire doors to help create a consistent look throughout your property.
How should I care for the unfinished oak surface?
After applying your chosen finish, clean with a soft, damp cloth. Avoid harsh chemicals or excessive moisture.
What tools or materials are needed for installation?
You will need appropriate finishing materials (paint/stain), brushes/rollers, sandpaper, hinges, a handle, and potentially a saw or plane for minor adjustments. Always refer to specific product instructions.
Troubleshooting
Door sticks or is difficult to open/close.
Check if the door has been properly hung and if there is sufficient clearance around the edges. Warping can occur if the door was not properly acclimatized or if the finish is uneven. Adjust hinges or plane the edges if necessary.
Finish is uneven or blotchy.
Ensure the surface was properly prepared before applying paint or stain. Apply finishes in thin, even coats and allow adequate drying time between applications. Sand lightly between coats if recommended by the finish manufacturer.
Obscure glass is not private enough.
The level of privacy can vary based on lighting conditions. If greater privacy is required, consider applying a privacy film designed for glass, ensuring compatibility with the door's existing finish.
Pros and Cons
Pros
- Enhances natural light flow between rooms.
- Provides a good level of privacy due to obscure glass.
- Offers design flexibility with its unfinished surface.
- Contributes to a cohesive interior design when used with other Verona range doors.
- Durable construction suitable for regular use.
Cons
- Requires finishing (painting or staining) before installation.
- Obscure glass may not be suitable for all applications where full light transmission is desired.
- Specific dimensions might require minor adjustments for non-standard openings.
Setup, Compatibility & Care
Setup: Ensure the door is acclimatized to the room's environment for at least 48 hours before finishing or hanging. Apply your chosen paint or stain evenly, following the manufacturer's instructions for the finishing product. Fit the door into the prepared frame, ensuring appropriate clearances. Hardware such as hinges and handles should be installed according to their specific instructions.
Compatibility: This door is designed for internal use only. It is compatible with standard interior door frames and ironmongery. Check the precise dimensions (1981mm x 838mm x 35mm) against your existing frame to ensure a suitable fit. If minor adjustments are needed, consult a professional carpenter.
Care: Clean the door surface with a soft, damp cloth. Avoid abrasive cleaners or excessive moisture, which can damage the wood finish. Periodically check ironmongery for secure attachment. For painted or stained surfaces, follow the care instructions for the specific finish used.