Sanding Belt - 100mm X 1220mm - 80 Grit

An 80-grit belt is ideal for aggressive material removal, shaping wood or metal, and preparing surfaces for finer sanding stages. It's effective for removing old finishes or quickly reducing material thickness.

This belt measures 100mm x 1220mm. You should check your belt sander's manual or specifications to confirm it requires this specific belt size. The product is designed for 'Model No. Belt Sander' and compatible with other leading brands accepting these dimensions.

No, 80-grit is a coarse grit and is not suitable for fine finishing. You would typically move to grits like 120, 180, or higher for finishing work after using an 80-grit belt.

The lifespan of a sanding belt depends on the material being sanded, the pressure applied, and the type of task. For optimal performance, replace the belt when you notice a significant decrease in cutting speed or a change in the surface finish.

Aluminium oxide is a durable, sharp, and common abrasive material known for its effectiveness in cutting through wood and metal. It's self-sharpening to a degree, offering good longevity.

Yes, the cloth backing provides strength and flexibility. It makes the belt more resistant to tearing and allows it to flex around curves and contours without breaking, contributing to a smoother finish and longer life.

Check belt tension and adjust the tracking knob on the sander as per the manufacturer's instructions. Ensure the belt is seated correctly on the pulleys.

Increase belt tension slightly. Verify that the belt size is correct for your sander and that the pulleys are clean and undamaged.

Reduce sanding pressure to avoid overheating. Ensure you are using the correct grit for the material and task. Check for any obstructions or damage on the sander's contact surface or pulleys.

The belt may be clogged with dust. Try cleaning the belt surface or replace it if the abrasive is worn down. Ensure the sander is operating at the correct speed.