Slangklem voor 50 mm slang - Profec
Best current price£1.95from Waterpump UK
Best offers
Shopping.co.uk recommended and popular offers
Waterpump UK£1.95Visit shop Profec Slangklem Voor 50 Mm Slang
Visit shopWaterpump UK£1.95Visit shop One Offer
1 offer from £1.95
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone using the Profec Slangklem, designed for securely connecting a 50mm hose to a pump or socket. The key benefit is a reliable, leak-free connection. However, users should be aware that proper tightening with a screwdriver is crucial for optimal performance. This guide covers features, setup, usage, and troubleshooting.
All features
| Model Part Number | 0464633 |
|---|---|
| Brand | Profec |
Extended Product Information
FAQs
What size hose is this clamp for?
This clamp is designed for 50 mm (2") hoses.
What material is the clamp made of?
The clamp is made of steel.
How do I install the clamp?
Slide the clamp over the hose, insert the hose onto the fitting, and tighten the clamp with a screwdriver.
Can I reuse the clamp?
Yes, the clamp can be reused unless it's damaged or corroded.
What should I do if the clamp rusts?
If the rust is minimal, clean with a wire brush. If the rust is extensive, replace the clamp.
How tight should I make the clamp?
Tighten it until the hose is securely held in place and there are no leaks. Avoid over-tightening.
Troubleshooting
The hose is leaking.
Tighten the clamp further using a screwdriver. Ensure the hose is properly seated in the socket.
The clamp is difficult to tighten.
Check for any obstructions or debris between the clamp and the hose. Ensure the screwdriver fits the screw head properly.
The clamp is rusty.
Replace the clamp if the rust is severe. Light surface rust can be cleaned with a wire brush.
Pros and Cons
Pros
- Provides a tight and secure seal, preventing leaks.
- Made from durable steel for extended lifespan.
- Easy to install and adjust with a standard screwdriver.
- Specifically designed for a common hose size (50 mm).
- Offers a cost-effective solution for hose connections.
Cons
- Requires a screwdriver for installation, which is an extra tool.
- Only compatible with 50 mm hoses.
- Can be damaged if over-tightened.
Setup, Compatibility & Care
- Preparation: Ensure you have a 50 mm (2") hose and the pump or socket ready.
- Placement: Slide the clamp over the hose end.
- Connection: Insert the hose end onto the pump or socket.
- Tightening: Using a screwdriver, tighten the clamp until it securely grips the hose.
- Check: Ensure the hose is firmly attached and does not leak.
*Compatibility:* This clamp is specifically designed for 50 mm (2") hoses.
*Care:* Inspect the clamp periodically for rust or damage. If necessary, clean with a dry cloth. Avoid over-tightening the clamp to prevent damage.