Silverhook Big Boy Lightweight Body Filler - 600ml

It can be used on wood, metal, concrete, and some types of PVC.

Drying time varies depending on the conditions, but typically overnight is recommended before sanding.

Yes, once the filler is fully dry and sanded, it can be painted. Use a primer first for the best results.

It is water-resistant, making it suitable for exterior applications.

The package includes the filler and the hardener.

Store in a cool, dry place, away from direct sunlight, and ensure the container is tightly sealed.

Ensure adequate ventilation, avoid contact with skin and eyes, and keep out of reach of children. Refer to the hazard safety codes: Xn, Xi, R10, R20, R36/38.

Ensure the correct ratio of filler to hardener was used. Check that the hardener is fresh and not expired. The ambient temperature may be too low; allow for more drying time or work in a warmer environment.

Allow the filler to fully cure before sanding. Ensure you are using the correct grit sandpaper. Try a coarser grit to start.

The filler may have been applied in too thick a layer. Apply in thinner layers, allowing each layer to dry completely before applying the next.

Make sure the surface is properly prepared; clean, dry, and free from contaminants. The correct hardener should be used, and the mixture should be thoroughly mixed.