Autotek Aerosol Spray Paint - Green - 300ml
Best current price£11.19from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek Ford Laurel Green Fast Dry High Coverage Aerosol Spray Paint 300ml
Visit shopeBay£11.19Visit shop All Offers
4 offers from £11.19 - £12.99
View price history by clicking the chart icon.
eBayAutotek Ford Laurel Green Fast Dry High Coverage Aerosol Spray Paint 300ml
Free delivery in 1–3 days
£11.19
Visit shop
Autotek Ford Laurel Green Fast Dry High Coverage Aerosol Spray Paint 300mlFree delivery in 1–3 days£12.99Visit shop →
My Motor WorldAutotek Green Ford Laurel Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Green Ford Laurel Spray Paint 300MlFree delivery in 1–3 days£12.99Visit shop →
Product Information
Full details
This Autotek Aerosol Spray Paint in Green (300ml) is designed for car enthusiasts and DIYers needing an exact color match for specific Ford models (1976-1985). Its key benefit is providing a durable, high-quality, professional finish with excellent color precision. A potential caveat is the requirement for specific temperature conditions during application and the need for proper surface preparation.
All features
| Colour | Green |
|---|---|
| Model Part Number | ATOMC263300 |
| Brand | Autotek |
| Container Volume | 300ml |
Extended Product Information
FAQs
What specific Ford models is this paint designed for?
This paint is an exact match for Manufacturer Paint Code K, 1337 Autotek Ford Laurel Green and is compatible with Ford models manufactured between 1976 and 1985.
Can I use this paint on surfaces other than metal?
Yes, the paint contains protective properties suitable for application on metal, glass fibre, and rigid plastic surfaces.
How long should I wait between coats?
Allow approximately 10 to 20 minutes between applying thin coats to ensure proper drying and adhesion.
What are the ideal conditions for applying this spray paint?
The paint should be applied outdoors or in a well-ventilated area at temperatures between 15°C and 25°C.
How do I prevent the nozzle from clogging?
After each use, turn the aerosol can upside down and spray for 2-5 seconds to clear any residual paint from the nozzle.
What preparation is needed before painting?
The surface must be clean, free from dirt, rust, and oil. Masking is recommended, and applying a minimum of two coats of Autotek Grey Primer is advised for optimum adhesion and finish.
How long does the paint take to fully cure?
The paint should be touch dry in 10-20 minutes, but allow a full 24 hours for it to cure completely.
Troubleshooting
Uneven spray pattern or sputtering
Ensure the can has been shaken thoroughly for at least 2 minutes. If sputtering persists, try spraying upside down for a few seconds to clear the nozzle. Check if the nozzle is blocked and clean if necessary.
Paint not adhering well or peeling
Verify that the surface was properly cleaned, degreased, and free of contaminants before application. Ensure the recommended primer was used and allowed to dry fully. Check that application was done within the recommended temperature range.
Poor color match
Confirm that the paint code (K, 1337) and vehicle model/year (Ford 1976-1985) are correct. Ensure the original paint on the vehicle has not faded significantly, which might affect the perceived match. Apply thin coats for best results.
Slow drying time
Ensure application is within the recommended temperature range (15°C-25°C) and humidity levels are not excessively high. Avoid applying overly thick coats.
Pros and Cons
Pros
- Provides an exact color match for specified Ford models.
- Offers protective properties for enhanced surface longevity.
- Fast-drying formula speeds up the painting process.
- Achieves a smooth, high-quality, professional finish.
- Compatible with a wide range of automotive paint finishes.
Cons
- Limited to specific Ford models and years for exact match.
- Requires precise temperature range (15°C-25°C) for optimal application.
- Needs thorough surface preparation, including primer application, for best results.
- Requires outdoor or well-ventilated area use due to aerosol nature.
Setup, Compatibility & Care
Preparation is crucial for optimal results.
- Clean the Surface: Ensure the area to be painted is thoroughly cleaned and free from dirt, rust, grease, oil, and wax.
- Masking: Carefully mask off surrounding areas to prevent overspray.
- Priming: For best adhesion and finish quality, apply at least two coats of Autotek Grey Primer and allow it to dry.
Application Instructions:
- Shake Well: Shake the aerosol can vigorously for approximately two minutes before use.
- Spray Distance: Hold the can 15-25cm away from the surface.
- Application Technique: Apply in several thin, even coats. Allow 10-20 minutes between each coat. After each application, turn the can upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
- Drying: The paint will be touch dry in 10-20 minutes. Allow a full 24 hours for the paint to cure completely.
Important Notes:
- Use only outdoors or in a well-ventilated area.
- Ensure the ambient temperature is between 15°C and 25°C for application.
- Use only as directed.
Compatibility: This paint is suitable for cellulose finishes and is compatible with nearly all automotive paint finishes. It can be applied to metal, glass fibre, and rigid plastic surfaces.