Best current price£7.99from eBay
Shopping.co.uk recommended and popular offers
eBay£7.99Visit shop 26"" x 1.75/2.125 Inner tube with 33mm Schrader valve Simply cycling MTB Racing
Visit shop
B&Q£12.99Visit shop B&Q - 20In X 1.75 Bike Inner Tube Schrader Valve Bicycle Tyre Road Mtb
Visit shop20 offers from £7.99 - £13.99
View price history by clicking the chart icon.
The Simply Cycling Bike Inner Tube (Model CC010) is designed for mountain and hybrid bike enthusiasts who require a reliable, easy-to-install replacement for 29-inch wheels. Featuring a durable construction and a standard Schrader valve, it provides consistent pressure and airtight performance for your daily commutes or trail riding. A notable caveat is that this tube is specifically sized for tire widths between 1.9 and 2.3 inches, so ensure your current tire specs match this range before purchase.
| Model Part Number | CC010 |
|---|---|
| Brand | Simply Cycling |
No, this tube is specifically sized for 29-inch wheels. Installing it on a 27.5-inch rim will cause excess material, leading to folds and inevitable failure.
This tube is designed for 29-inch mountain or hybrid bikes. Most road bikes use 700c wheels with much narrower tire widths, so this tube will likely be too large.
A Schrader valve is the same style of valve used on car tires. It is the wide, spring-loaded metal valve stem common on most standard bicycles.
No, a standard bicycle pump that supports Schrader valves is compatible. You can also inflate this at most gas stations.
Check the sidewall of your current bicycle tire; it will list the diameter (e.g., 29) and the width (e.g., 2.1). As long as the width is between 1.9 and 2.3, this tube will work.
Check the tire casing for any small thorns or sharp objects that may have caused the previous puncture and are still lodged inside.
Ensure your pump is set to the 'Schrader' setting. This tube uses the thicker, standard automotive-style valve, not the thinner Presta valve.
Use tire levers carefully and avoid using screwdrivers or sharp objects; ensure the tube is tucked fully inside the tire bead before inflating.
To install the tube, first remove the wheel from your bicycle and use tire levers to peel back one side of the tire casing. Remove the old tube and carefully inspect the inside of the tire for thorns, glass, or other debris that caused the initial puncture. Slightly inflate the new tube before inserting it into the tire to help it hold its shape, then seat the tire bead back onto the rim. Once seated, inflate to your desired pressure as specified on the side of your tire. Compatibility is limited to 29-inch rims; always verify your tire sidewall matches the 1.9-2.3" width range. Avoid using sharp metal tools during installation to prevent pinching or puncturing the new tube.
