Nipple - 1/2 - 222208
Best current price£3.54from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£3.54Visit shop Women's Light Nipple 1/2 Screwed Stainless Steel Tf/Bnss015
Visit shopCity Plumbing GB£3.54Visit shop One Offer
1 offer from £3.54
View price history by clicking the chart icon.
City Plumbing GBWomen's Light Nipple 1/2 Screwed Stainless Steel Tf/Bnss015
Free delivery in 1–3 days
£3.54
Visit shop
Product Information
Full details
The 1/2-inch pipe nipple is a versatile plumbing component designed for DIY enthusiasts, homeowners, and contractors needing to extend piping or connect threaded equipment. Its primary benefit is providing a simple, secure bridge between two female-threaded fittings, though users should note that it requires proper thread sealant to ensure a leak-proof connection in pressurized systems.
All features
| Model Part Number | 222208 |
|---|---|
| Brand | Unbranded |
Extended Product Information
FAQs
Does this nipple come with thread tape?
No, thread seal tape or pipe dope must be purchased separately.
Can I use this for gas lines?
Always verify that the material and rating of the nipple are certified for the specific medium (water, gas, oil) you are plumbing.
How much should I tighten it?
Tighten until secure and leak-free; avoid over-tightening as it can crack the female fitting.
Is 1/2-inch the inner or outer diameter?
1/2-inch refers to the nominal pipe size (NPS), which indicates the approximate inner diameter; the actual outer diameter will be larger.
Can this be reused?
While technically possible, it is recommended to use a new nipple for critical connections to ensure the best seal.
Troubleshooting
Leakage at the connection point
Ensure sufficient thread seal tape was applied and verify that the fitting was tightened adequately.
Difficulty threading into the female fitting
Check the threads for debris or damage; ensure that you are not cross-threading the piece.
Wrench marks on the nipple surface
Wrap the jaw of your pipe wrench in a cloth or use a dedicated soft-jaw tool to protect the finish during installation.
Pros and Cons
Pros
- Simple and easy to install
- Universally compatible with standard 1/2-inch NPT fittings
- Provides a rigid, permanent connection
- Cost-effective solution for plumbing modifications
Cons
- Requires thread sealant tape for a watertight seal
- Limited to threaded connections only
- May require pipe wrenches, which can mar the surface if not careful
Setup, Compatibility & Care
To install, start by applying a high-quality thread seal tape (Teflon tape) or pipe dope to the male threads. Insert the nipple into the first female fitting and turn clockwise until hand-tight, then use a pipe wrench to secure it, typically adding one to two additional turns. Repeat the process for the second fitting. To maintain the integrity of the connection, check for leaks after pressurizing the system. If the pipe is used in outdoor or high-corrosion environments, ensure the material is compatible with the surrounding plumbing to prevent galvanic corrosion.