Tommee Tippee Ultra UV Steriliser, Dryer & Storage - Baby Bottles & Accessories - TT423110

You can sterilize a wide range of baby feeding accessories including bottles (various brands), teats, collars, caps, soothers, breast pump components, and small baby-safe cutlery. The adjustable shelves help accommodate different item sizes.

No, this is a UV steriliser and does not require water, steam, or chemicals for the sterilization process. This means no more wet bottles or limescale residue.

Once a sterilisation cycle is complete, if the door remains closed, items will stay sterile for up to 24 hours. The 'Storage' mode continuously runs short UV and drying cycles every 2 hours to maintain this sterile environment.

The filter should be regularly cleaned to ensure efficient drying and prevent dust buildup. While there's no fixed schedule, visually inspect it weekly and clean it if it appears dirty. Replace it if it becomes damaged or cannot be cleaned effectively. > Info needed: [Specific replacement frequency is usually in the product manual.]

No, UV sterilization is a gentle process that does not use heat or chemicals, making it safe for most common baby bottle materials (plastic, glass) and accessories. Always ensure items are clean and free of residue before placing them in the unit.

The UV lamp is a long-life component. While not frequently replaced by the user, if replacement is ever needed, it's recommended to contact Tommee Tippee customer service or refer to the product manual for information on compatible replacement parts. > Info needed: [Specific UV bulb type and replacement instructions are usually in the product manual.]

Ensure the power cord is securely plugged into both the unit and a functional electrical outlet. Try plugging another appliance into the same outlet to confirm power availability. If the unit still does not respond, check the fuse in the plug.

Ensure items are loaded correctly and not overcrowded, allowing proper airflow. Check if the washable filter is clean and properly installed; a clogged filter can reduce drying efficiency. Ensure excess water is shaken off items before placing them in the steriliser.

Verify that all items were thoroughly washed before being placed in the steriliser. Ensure the door is fully closed during the cycle. Check that the unit's interior is clean. Clean the washable filter and the interior of the unit, and ensure the filter is completely dry before re-inserting.

Confirm that the 'Storage' cycle was activated after the initial sterilisation/drying. Ensure the steriliser door remains closed; opening it will break the sterile environment until the next storage cycle. If the door is opened, you can re-select the storage program.

Ensure glow-in-the-dark products are placed directly in the steriliser during a cycle, as the UV light charges them. For best results, place them where they have maximum exposure to the UV light.