Jagwire Sport Disc Brake Pads - Shimano MTB/TRP
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Jagwire Sport Semi-Metallic Disc Brake Pads are designed for the everyday cyclist seeking an upgrade over standard equipment. They offer a balanced blend of quiet operation and durability, providing reliable stopping power for a variety of riding conditions. While offering excellent value, their performance might not match specialized high-end pads for extreme use.
All features
| Series | Sport |
|---|---|
| Model Part Number | DCA027 |
| Brand | Jagwire |
Extended Product Information
FAQs
Are these pads suitable for all weather conditions?
Yes, the semi-metallic compound offers good performance in both wet and dry conditions, though extreme mud or water can impact any brake pad's longevity.
How do I know if these pads are compatible with my brakes?
Check the 'Compatibility' section in this guide and compare your brake caliper model with the listed Shimano and TRP models. If unsure, consult your bicycle's manual or a local bike shop.
What is the difference between semi-metallic and resin pads?
Semi-metallic pads offer better heat resistance and durability than resin (organic) pads, while generally being quieter and having a softer initial bite than full metallic pads.
How often should I replace my brake pads?
Pad replacement frequency depends on riding style, terrain, and conditions, but a general guideline is when the pad material wears down to approximately 1mm. Regular inspection is recommended.
Do these pads come with new springs or clips?
The product description indicates that a mounting kit is included, which typically contains the necessary hardware for installation. Please refer to the packaging for exact contents.
Can I use these pads for downhill mountain biking?
While they offer good performance, for extreme downhill applications requiring maximum heat resistance and power, specialized downhill brake pads might be a better choice. These are excellent for general trail riding and cross-country.
What is 'bedding in' and why is it important?
Bedding in is a process of conditioning new pads and rotors to achieve optimal performance. It involves a series of moderate stops to transfer a thin layer of pad material to the rotor, improving stopping power and reducing noise.
Troubleshooting
Brakes are noisy (squealing)
Ensure pads and rotors are clean and free of debris. Check for proper pad alignment within the caliper. Bedding in the pads correctly can also reduce noise.
Reduced braking power
Inspect pads for excessive wear. Clean the rotor surface. Check for any air in the brake lines (if hydraulic) and consider a brake bleed if necessary. Ensure the pads are correctly seated.
Pads wear out quickly
Consider riding conditions; very wet or muddy environments can accelerate wear. Ensure the correct pad type is used for the intended application. Check for rotor glazing, which can cause premature wear.
Brakes feel spongy
This typically indicates air in the hydraulic system. The brake system may need to be bled according to the manufacturer's instructions.
Pros and Cons
Pros
- Offers a good balance between quiet braking and durability.
- Provides a significant performance upgrade from many stock brake pads.
- Versatile compound suitable for various riding conditions.
- Cost-effective option for enhancing braking performance.
- Designed for easy installation with included mounting kits.
Cons
- May not offer the absolute peak performance required for extreme downhill or racing applications.
- Semi-metallic compound can be noisier than pure resin pads in certain conditions.
- Steel backing plate is heavier than aluminum alternatives found on higher-end models.
Setup, Compatibility & Care
Compatibility:
These pads are designed to be compatible with a wide range of Shimano brake systems, including XTR (M975, M966, M965), Saint (M800), Deore XT (M776, M775, M765), SLX (M665), Deore LX (T665, M585), Hone (M601), Deore (M535, M595, M596, M545), and Alfine (S500, S501), as well as TRP systems. Always verify your specific brake caliper model against the compatibility list before purchase.
Installation:
- Ensure your bicycle is securely supported.
- Remove the wheel and the old brake pads from the caliper.
- Clean the caliper interior and rotor surface.
- Install the new Jagwire Sport Semi-Metallic pads using the provided mounting kit.
- Reinstall the wheel and perform a brake bedding-in procedure.
Care:
- Regularly inspect pads for wear. Replace when the pad material is significantly diminished.
- Keep rotors clean using a dedicated disc brake cleaner.
- Avoid contamination of the pad surface with lubricants or oils.
- Listen for any unusual noises, which may indicate wear or contamination.