Best current price£345.81from eBay
Shopping.co.uk recommended and popular offers
eBay£345.81Visit shop EarthQuaker Devices Pyramids Stereo Flanging Effects Pedal
Visit shop1 offer from £345.81
View price history by clicking the chart icon.
The EarthQuaker Devices Pyramids is a versatile stereo flanging effects pedal designed for guitarists and bassists seeking deep modulation textures. Its key benefit lies in its extensive control over flanger parameters, offering everything from classic jet-engine sweeps to intricate rhythmic patterns. A primary consideration is its Japanese voltage requirement, necessitating a voltage transformer for use outside of Japan to prevent damage.
| Model Part Number | EQDPYRAV1USA |
|---|---|
| Brand | EarthQuaker Devices |
The Pyramids requires a 9V DC power supply with a center-negative plug, drawing at least 200mA. Crucially, it is designed for Japanese voltage (90-110V) and requires a voltage transformer if used in regions with different standard voltages.
Yes, as long as the power supply provides 9V DC, has a center-negative plug, and supplies at least 200mA. However, always ensure the correct voltage conversion (transformer) is used if you are outside of Japan.
Positive feedback generally emphasizes the resonant frequencies of the flanger, creating a more pronounced and sometimes self-oscillating effect. Negative feedback tends to create a smoother, more traditional flanging sound by reducing the intensity of the resonant peaks.
The 'Modify' control is a multifunction parameter that alters various aspects of the flanger's behavior depending on the selected mode. It can affect LFO shape, sweep range, or other sonic characteristics, adding dynamic depth to the effect.
Yes, the Pyramids is suitable for both guitar and bass. Its stereo capabilities are particularly useful for bassists seeking to add width and dimension to their sound without compromising the core tone.
'Through-Zero' refers to a tape flanging technique where the delay time can pass through zero. This creates a distinct sonic artifact, often described as a 'warble' or 'flutter,' which is characteristic of vintage tape effects.
While the description doesn't detail the exact preset saving procedure, typically with pedals featuring presets, you would adjust all desired controls, then press and hold a specific footswitch or combination of footswitches to store the current settings into an available preset slot.
Check all cable connections. Ensure the power supply is correctly connected and providing sufficient voltage. Verify the Mix knob is not turned all the way to dry. Test with different cables and amplifiers.
Ensure the power supply is connected. Check the footswitch itself for any visible damage. If the issue persists, contact customer support.
Try a different power supply, preferably a dedicated isolated power supply, to rule out ground loop noise. Ensure all cables are properly shielded. Test the pedal in a different signal chain or location to isolate the source of noise.
The pedal requires a voltage transformer for use outside of Japan (90-110V). If the pedal was used without a transformer, it may be damaged and require professional repair. EarthQuaker Devices is not responsible for damages caused by improper voltage use.
Setup:
Compatibility:
Care:
