Best current price£95.86from eBay
Shopping.co.uk recommended and popular offers
eBay£95.86Visit shop Clutch Master & Slave Cylinder fits IVECO DAILY Mk3, Mk4 3.0D LHD Only 04 to 11
Visit shop12 offers from £95.86 - £128.43
View price history by clicking the chart icon.
This LuK Clutch Master & Slave Cylinder kit (Part Number: 513 0071 10) is for owners of specific left-hand drive IVECO DAILY models with manual transmissions, offering a reliable replacement for worn clutch hydraulics. Its primary benefit is restoring smooth clutch operation, ensuring efficient gear changes. A key consideration is its specific vehicle fitment, requiring careful verification before purchase.
| Model Part Number | 513 0071 10 |
|---|---|
| Brand | LuK |
This kit is designed for specific left-hand drive IVECO DAILY III and IV models with manual transmissions, including ZF Transmission types 6S-400 OD and 5S-300. VIN compatibility starts from 5970972 and D330395. Always use a fitment tool or contact us to confirm compatibility.
Yes, this is a complete kit that includes both the clutch master cylinder and the clutch slave cylinder.
No, this specific kit (513 0071 10) is designed exclusively for left-hand drive vehicles.
You should use the type of brake fluid recommended by IVECO for your specific vehicle model. Typically, this would be DOT 3 or DOT 4 brake fluid, but always consult your vehicle's owner's manual.
The bleeding process involves opening a bleeder valve on the slave cylinder while someone depresses the clutch pedal. Once fluid flows without air bubbles, close the valve and repeat as necessary. It is best performed by a qualified mechanic.
This LuK kit corresponds to OEM references 504191582, 5801386403, 5801521973, and 5802182050.
Yes, due to the complexity of clutch hydraulic systems and the need for proper bleeding, professional installation by a qualified mechanic is strongly recommended.
This typically indicates air in the hydraulic system. The system needs to be properly bled. Check for any leaks in the lines, master cylinder, or slave cylinder.
May be due to incomplete clutch disengagement. Ensure the slave cylinder is fully actuating and the master cylinder is providing adequate pressure. Check for proper bleeding and line integrity.
Inspect the seals on both the master and slave cylinders. Also, check the clutch hydraulic line for damage or loose fittings. Replace any leaking components.
Re-verify compatibility with the vehicle's VIN and specific transmission type. Ensure the system was bled correctly and there are no other underlying clutch or transmission issues.
Compatibility Verification: Before installation, it is critical to confirm this part (513 0071 10) fits your specific vehicle. Use the provided make and model tool, and cross-reference the OEM part numbers (504191582, 5801386403, 5801521973, 5802182050). Ensure your IVECO DAILY model (III or IV, Kasten, Kombi, Pritsche/Fahrgestell, Bus body types) and transmission type (ZF 6S-400 OD, 5S-300) match. VIN compatibility starts from 5970972 and D330395 for left-hand drive vehicles only.
Installation: Installation requires draining the clutch fluid, disconnecting lines, removing old cylinders, installing new ones, and reconnecting. Bleeding the clutch hydraulic system thoroughly after installation is essential to remove any air and ensure proper function. It is highly recommended that this component be installed by a qualified mechanic.
Care: Once installed, the primary care involves maintaining the clutch fluid level in the reservoir. Use the correct type of brake fluid as specified by IVECO. Regularly inspect for any signs of leaks around the master and slave cylinders or the clutch hose. The clutch system itself requires no routine maintenance beyond fluid checks and proper operation.
