Makita Lawnmower - MPN: 9704882-01

Use fresh, unleaded petrol. Refer to the engine manual for specific recommendations regarding fuel types and ethanol content.

Use the central cutting height adjustment lever, typically located near the rear wheels. This lever allows you to select from 10 different height positions, ranging from 2.5 cm to 7.5 cm.

The LC 140SP is designed for smaller to medium-sized lawns. For larger areas, a mower with a wider cutting deck and potentially a more powerful engine would be more efficient.

Loosen the knobs on the handlebar pivots and fold the upper section of the handlebar down towards the mower deck. Re-tighten the knobs to secure it in the folded position.

Regular maintenance includes checking and topping up oil, cleaning or replacing the air filter, and checking/cleaning the spark plug. Refer to the engine manual for a detailed maintenance schedule.

The grass catcher has a volume of 50 liters.

Please refer to the product documentation or contact your retailer for specific warranty information, as it can vary by region and retailer.

Ensure there is fuel in the tank, the spark plug is connected, and the choke is set correctly. Check that the oil level is adequate and the spark plug is clean.

Check if the blade brake cable is engaged or obstructed. Ensure the blade is securely attached and not damaged.

Verify the cutting height is set correctly and consistently across all wheels. Ensure the blade is sharp and clean. Check the deck for any obstructions.

Confirm the drive cable is connected and adjusted properly. Ensure there are no obstructions in the drive mechanism.

Check if the blade is unbalanced or damaged. Ensure all handle bolts are tightened securely.