Best current price£6.28from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£6.28Visit shop Freefoam Golden Oak Fascia Board External Corner - 300Mm
Visit shop2 offers from £6.28 - £6.91
View price history by clicking the chart icon.
The Freefoam Fascia Board External Corner in Golden Oak is an essential component for professional roofing contractors and DIY enthusiasts seeking a seamless, durable finish for PVC fascia installations. Designed to bridge the 10mm expansion gap required for thermal movement, this corner piece protects your roofline from weather while maintaining an aesthetic wood-grain appearance; however, users must strictly follow specific gluing and sealing techniques to ensure the system remains functional under varying temperatures.
| Model Part Number | FWXWGO |
|---|---|
| Brand | Freefoam |
No. Doing so will restrict thermal movement and likely cause the PVC to buckle or crack.
A standard hacksaw or any fine-toothed saw will provide a clean, accurate cut.
PVC expands and contracts with temperature changes. The 10mm gap allows this movement without putting pressure on the corner components.
While it fits many standard PVC boards, it is specifically designed for the Freefoam system; verify your board dimensions before installation.
Avoid using abrasive cleaners or solvents. Clean the surface periodically with a mild soap solution and a soft cloth.
Check if both sides were glued; only one side should be fixed, while the other must be allowed to move.
Ensure the fascia boards were cut square and that the 10mm expansion gap was not exceeded.
Installation requires precise attention to movement control. First, ensure your 10mm expansion gap is clear of debris. To install the corner, apply a suitable PVC adhesive to only one side of the joint, effectively bonding the corner to one fascia board. The opposite side must NOT be glued; instead, apply a bead of low modulus silicone sealant. This allows the second board to move independently behind the corner cover. You can resize the 300mm length using a fine-toothed saw or a standard hacksaw to ensure a flush fit. Periodic cleaning with mild soap and water is recommended to maintain the Golden Oak finish.
