Autotek Plastic Primer - 300ml
Best current price£11.19from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek Red Plastic Primer Fast Dry High Coverage Aerosol Spray Paint 300ml
Visit shopeBay£11.19Visit shop All Offers
4 offers from £11.19 - £12.99
View price history by clicking the chart icon.
eBayAutotek Red Plastic Primer Fast Dry High Coverage Aerosol Spray Paint 300ml
Free delivery in 1–3 days
£11.19
Visit shop
Autotek Red Plastic Primer Fast Dry High Coverage Aerosol Spray Paint 300mlFree delivery in 1–3 days£12.99Visit shop →
My Motor WorldAutotek Red Plastic Primer Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Red Plastic Primer Spray Paint 300MlFree delivery in 1–3 days£12.99Visit shop →
Product Information
Full details
The Autotek Plastic Primer is an essential tool for DIY enthusiasts and automotive hobbyists looking to paint plastic components effectively. Designed to provide a high-adhesion base coat, this fast-drying acrylic formula ensures that subsequent layers of paint achieve a smooth, professional finish without the risk of surface distortions or runs. While it is highly efficient at preparing plastics for top coats, users must work in a well-ventilated space and strictly adhere to the 24-hour full curing time to ensure the best possible durability.
All features
| Model Part Number | SP391300 |
|---|---|
| Brand | Autotek |
Extended Product Information
FAQs
How long should I wait before applying the top coat?
You should wait until the primer is fully touch-dry, which takes 10-20 minutes, though for best results, wait at least one hour before applying the color coat.
Can I use this on non-plastic surfaces?
This primer is specifically formulated for plastic. While it may stick to other surfaces, it is designed for optimal performance on plastic substrates.
Is it necessary to sand after priming?
If you have applied an even coat, light sanding is usually not required. However, if there are imperfections, a light wet-sand with fine-grit paper is recommended.
Why does the paint feel tacky after 20 minutes?
This usually indicates the ambient temperature is too low (below 15°C), which significantly slows the evaporation of the solvents.
How do I know when the primer has fully cured?
The primer requires 24 hours at room temperature to reach its full chemical cure and maximum hardness.
Troubleshooting
The paint is running or sagging during application.
You are applying the coats too heavily or holding the nozzle too close to the surface. Apply thinner, lighter passes from a distance of 15-25cm.
The nozzle is clogged and not spraying evenly.
You likely failed to clear the nozzle after the last use. Try soaking the nozzle in a mild solvent or replacing it if blockage persists.
The finish looks bumpy or uneven.
Ensure the plastic surface was cleaned thoroughly before priming. Bumps are often caused by dust or contaminants trapped under the primer layer.
Pros and Cons
Pros
- Promotes excellent paint adhesion on difficult plastic surfaces
- Rapid drying time allows for quick project completion
- Smooth finish reduces the need for extensive sanding
- Easy-to-use aerosol delivery system
- Self-cleaning nozzle prevents clogs
Cons
- Requires strict adherence to temperature ranges for optimal curing
- Strong odor requires use in well-ventilated areas only
- Full cure time of 24 hours limits immediate handling
Setup, Compatibility & Care
For best results, use this product in environments with temperatures between 15°C and 25°C. Operating outside of this range may affect the drying speed and the final adhesion strength.
After finishing your work, you must clear the nozzle to prevent blockages. Turn the can upside down and spray for 2-5 seconds until only propellant comes out. Store the canister in a cool, dry place away from direct sunlight to maintain the integrity of the acrylic formula.