WAGO 750-1504 Digital Output Module - 16-Channel Digital Output Module 24VDC
Best current price£373.07from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£373.07Visit shop WAGO 750-1504 Automation module
Visit shopeBay£373.07Visit shop One Offer
1 offer from £373.07
View price history by clicking the chart icon.
Product Information
Full details
The WAGO 750-1504 is a compact 16-channel digital output module for WAGO 750 series fieldbus systems, ideal for industrial automation tasks requiring reliable control of actuators. Its key benefit is efficient space utilization and straightforward wiring with CAGE CLAMP S terminals. A potential caveat is its specific voltage and current rating per channel, which must be matched to the controlled devices.
All features
| Brand | WAGO |
|---|
Extended Product Information
FAQs
What is the maximum current rating per output channel?
Each output channel on the WAGO 750-1504 module can handle a maximum current of 0.5A.
Do I need a separate bus coupler for this module?
Yes, this module is designed to connect to the WAGO 750 series fieldbus system via a separate bus coupler. It does not have an integrated fieldbus interface.
What type of connection does the module use for wiring?
The module uses CAGE CLAMP S spring pressure terminals for tool-free, direct wire insertion.
What is the operating temperature range for this module?
The module is rated for operation within a temperature range of 0°C to 55°C.
Can this module be used for high-power applications?
No, with a 0.5A limit per channel, it is suitable for low-to-medium power actuators. For higher power needs, external relays or different modules may be required.
What does the optocoupler isolation provide?
Optocoupler isolation provides electrical separation between the control side (fieldbus) and the output side (actuators), protecting the control system from voltage spikes and electrical noise from the field devices.
What is the width of the module?
The module has a compact width of 12mm.
Troubleshooting
No output signal from a channel
Verify the 24VDC supply voltage is present and correct. Check the fieldbus system for correct configuration and output status. Ensure the actuator is properly connected and functional. Confirm the wire is securely seated in the CAGE CLAMP S terminal.
Module not recognized by fieldbus system
Check the connection between the module and the bus coupler. Ensure the bus coupler is properly configured and communicating with the fieldbus. Verify the module is correctly seated on the DIN rail and making proper contact.
Overheating or intermittent output
Check if the connected actuator exceeds the 0.5A per channel current limit. Reduce the load or use an external relay if necessary. Ensure the module is operating within its specified temperature range (0-55°C) and has adequate ventilation.
LED indicator not lit
This typically indicates no output signal or a fault condition. Refer to the solutions for 'No output signal' or 'Overheating/intermittent output'. Also, check the fieldbus command to the specific output channel.
Pros and Cons
Pros
- Space-saving 12mm width
- Tool-free CAGE CLAMP S wiring
- Individual channel status LEDs
- Optocoupler isolation for reliability
- High channel density (16 outputs in a small module)
Cons
- Limited to 0.5A per channel, may not be suitable for high-power actuators
- Requires a separate bus coupler for fieldbus connection
- No integrated fieldbus interface (e.g., Ethernet, PROFINET)
- Operating temperature range of 0-55°C may be restrictive in extreme environments
Setup, Compatibility & Care
Setup: The 750-1504 module is designed to be mounted on a standard DIN rail (35mm). It connects to the fieldbus system via a separate bus coupler. Wiring is accomplished using the CAGE CLAMP S spring pressure technology; simply strip the wire to the appropriate length and insert it directly into the terminal. Ensure the module is installed within its specified operating temperature range of 0-55°C and humidity of up to 95%.
Compatibility: This module is part of the WAGO 750 series and requires a compatible WAGO fieldbus station or coupler for operation. It is designed for 24VDC systems. Ensure the voltage and current requirements of your connected actuators do not exceed the module's specifications (24VDC, 0.5A per channel).
Care: The module requires minimal care. Keep the area around the module clean and free from dust. Ensure ventilation openings are not obstructed. Periodic checks of wire connections are recommended. Clean the exterior with a dry or slightly damp cloth; avoid using solvents or abrasive cleaners. The IP20 protection rating means it should be protected from direct contact with water or conductive materials.