RS PRO Conduit Clip - 20mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for electricians and installers looking for a fast, reliable, and aesthetically pleasing solution for securing 20mm galvanized conduit. The RS PRO Conduit Clip offers a one-piece design and a non-corrosive finish, providing a durable and time-saving installation. However, users should ensure they use a fire-rated fixing for optimal performance and compliance with relevant standards.
All features
| Model Part Number | 1823865 |
|---|---|
| Brand | RS PRO |
Extended Product Information
FAQs
What size conduit does this clip fit?
The RS PRO Conduit Clip is designed for use with 20mm galvanized conduit.
How many screws are required for installation?
Only one screw is required per clip.
What standards does this clip comply with?
It conforms to BS7671 and BS5839-1.
What is the melting point of the clip?
The melting point is >1200°C.
What type of screw should I use?
It is recommended to use a fire-rated fixing. D-Line D-Fixing screw is suggested.
Can I use this clip outdoors?
Yes, the non-corrosive finish makes it suitable for various environments.
Are these clips adjustable?
The saddle can be adjusted left or right side.
Troubleshooting
Clip doesn't fully secure the conduit.
Ensure the conduit is properly seated within the clip and that the screw is tightened sufficiently. Check for any obstructions.
Screw is difficult to insert.
Pre-drill a pilot hole if the mounting surface is hard. Use the recommended D-Line D-Fixing screw for best results.
Clip appears loose after installation.
Double-check that the clip is correctly wrapped around the conduit and that the screw is fully tightened. Ensure the mounting surface is stable.
Pros and Cons
Pros
- Saves time during installation with its one-screw design.
- Provides a clean and professional look.
- Offers durability thanks to its non-corrosive finish.
- Complies with key safety standards (BS7671 and BS5839-1).
- Easy to use in tight spaces.
- High fire resistance.
Cons
- Requires a fire-rated fixing for optimal performance.
- Only compatible with 20mm galvanized conduit.
- May require specific screws (like D-Line D-Fixing screw).
- Not suitable for other conduit sizes.
- Limited information on maximum load capacity.
Setup, Compatibility & Care
Setup:
- Position the RS PRO Conduit Clip around the 20mm galvanized conduit.
- Thread the tab through the slot.
- Fold the clip to lock it securely around the conduit.
- Insert and tighten a single screw (recommended: D-Line D-Fixing screw) to the mounting surface.
Compatibility:
- Designed for use with 20mm galvanized conduit.
- Ensure the mounting surface is suitable for the chosen fixing method.
- Use a fire-rated fixing to ensure compliance with fire safety regulations.
Care:
- The non-corrosive finish requires minimal maintenance.
- Regularly inspect installations for any signs of damage or loosening, especially in high-stress environments.
- Clean with a damp cloth if necessary; avoid harsh chemicals.