Best current price£18.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.97Visit shop - Noblessa Globe 90Cm X 1.5M Premium Static Cling Window Film For Privacy And Décor
Visit shop1 offer from £18.97
View price history by clicking the chart icon.
The Noblessa Globe Premium Static Cling Window Film is a DIY solution for enhancing privacy and adding decorative touches to glass surfaces like windows, doors, and shower screens. It offers a cost-effective alternative to blinds, providing 95% UV protection to prevent fading and reduce glare without blocking light. While easy to apply and reposition, a key caveat is the need to maintain a small gap from edges to ensure proper adhesion.
| Colour | White |
|---|---|
| Model Part Number | 305-5206 |
| Brand | HexGuard |
You can clean the film with a soft, damp cloth and a mild household cleaner diluted with water. Avoid abrasive materials or harsh chemicals that could damage the surface.
Yes, the static cling technology allows you to easily peel the film off and reapply it. Just ensure the glass is re-wetted before repositioning.
The Noblessa Globe Premium Static Cling Window Film comes with a 1-year guarantee.
The film provides privacy by obscuring the view, but it does not block natural light. The level of obscuring depends on the specific design, but it generally prevents clear viewing through the glass.
This film is designed for interior glass surfaces and windows. It is not recommended for automotive glass, as temperature fluctuations and vibrations can affect its adhesion and performance.
The static cling is designed to be durable for the life of the product when properly applied and cared for. It can be removed and reapplied multiple times.
The film measures 150cm (Height) x 90cm (Width).
No, one of the key benefits of static cling film is that it adheres without adhesive, meaning it can be removed cleanly without leaving any sticky residue on the glass.
Ensure the glass is perfectly clean and free of dust or grease. Make sure you have applied enough water during installation. Re-apply with more water and ensure there is a 2-5mm gap from all edges and seals.
Use a squeegee or smoother to firmly push out all trapped water and air bubbles towards the edges. If bubbles persist after drying, you may need to lift and reapply that section, ensuring adequate water is used.
This is usually due to residual cleaning solution or insufficient water during application. Clean the film gently with a damp cloth and mild soap. If the issue persists, it may require reapplication.
Try using two pieces of tape to peel the backing paper away from the film. Ensure you are peeling from a corner slowly and steadily.
This often happens if the film is applied too close to the edge or directly onto a rubber seal. Ensure a 2-5mm gap is maintained from all edges and seals. If it has lifted, try re-smoothing it and ensure the gap is present.
Setup Instructions:
Compatibility:
Care Instructions:
