St Helens Metal Watering Can with Sprinkler Nozzle and 4.5 Litre - Green

The watering can is made from durable galvanized iron.

The watering can has a capacity of 4.5 litres.

Yes, the sprinkler nozzle is detachable. You can use the watering can with just the spout for a more targeted stream.

Yes, it can be used indoors and can also serve as a decorative flowerpot. However, care should be taken to empty and dry it after use to maintain its condition.

The dimensions are approximately 43.00cm (length) x 20.00cm (width) x 30.00cm (height).

Wipe it clean with a damp cloth. Avoid using abrasive cleaners. Ensure it is emptied and dried after use.

The empty watering can weighs approximately 0.83kg.

Check the sprinkler nozzle for blockages. Gently clear any debris with a soft brush or a pin. Ensure the nozzle is screwed on tightly.

Ensure the sprinkler nozzle is properly and securely attached to the spout. The seal may be worn if the issue persists; consider a replacement nozzle.

Light rust can often be removed with a fine-grade steel wool or a rust remover designed for galvanized metal. For significant rust, the affected area may require touching up with a suitable metal paint, or the can may need replacing.

Check the points where the handles are attached. If they are riveted, you may need to gently tap the rivets back into place. If they are screwed, tighten the screws. If the handles are significantly damaged, professional repair or replacement might be necessary.