Best current price£50.12from eBay
Shopping.co.uk recommended and popular offers
eBay£50.12Visit shop Upol PLAS/5LG Plast X LIGHT GREY PAINT Plastic Bumper Trim Aerosol U-Pol X 3
Visit shop2 offers from £50.12 - £55.07
View price history by clicking the chart icon.
U-Pol Plast X Plastic Bumper Trim Paint is designed for automotive enthusiasts and DIY restorers looking to revitalize worn or faded plastic components. It delivers a fast-drying, professional-grade finish that mimics the original texture and appearance of vehicle bumpers and exterior trims. While it provides excellent coverage and durability, it requires a suitably primed surface to ensure long-term adhesion and prevent peeling on flexible automotive plastics.
| Colour | Grey |
|---|---|
| Model Part Number | PLAS/5LG/3 |
| Brand | U-Pol |
No, U-Pol Plast X is designed as a standalone topcoat for bumpers and trim, providing its own protective finish.
While formulated for exterior bumpers, it can be used on interior plastics; however, we recommend testing on an inconspicuous area first.
Depending on temperature and humidity, wait approximately 10-15 minutes between light coats for best results.
No, this product comes in a pre-mixed grey color as specified by the manufacturer; it cannot be tinted.
Clean with a wax and grease remover, then lightly abrade the surface with a Scotch-Brite pad or fine-grit sandpaper before priming.
The surface was likely not primed or cleaned thoroughly. Sand the area back, re-clean with a plastic degreaser, and apply a suitable plastic primer.
Ensure the can is shaken thoroughly for at least two minutes before use and maintain a consistent distance of 20-30cm during application.
Before applying, the surface must be thoroughly cleaned with a plastic degreaser to remove silicone, wax, or road grime. The plastic should be sanded lightly with a fine-grit abrasive to promote adhesion. Always apply a plastic-specific primer before using the Plast X paint. To maintain the finish, avoid using harsh abrasive cleaners or high-pressure washers directly against the painted surface for at least 48 hours to allow the paint to fully cure. Ensure the product is used in a well-ventilated area, preferably between 15-25 degrees Celsius for best spray consistency.
