Best current price£22.14from Lights.co.uk
Shopping.co.uk recommended and popular offers
Lights.co.uk£22.14Visit shop Osram Smart+ Wifi Switching Module, 1-Channel, Flush-Mounted, Ip20
Visit shop1 offer from £22.14
View price history by clicking the chart icon.
The OSRAM SMART+ WiFi 1-channel switching module is designed for homeowners looking to modernize their traditional electrical fixtures without replacing existing wall switches or light fittings. By enabling remote control via the SMART+ app, Alexa, or Google Home, it provides an efficient way to automate your home lighting and appliances; however, installation requires a basic understanding of electrical wiring and must be performed with the main power supply switched off.
| Colour | White |
|---|---|
| Model Part Number | 4058075849945 |
| Brand | OSRAM SMART+ |
No, this is a WiFi-enabled device and connects directly to your home network without needing an external bridge or gateway.
This is a 1-channel switching module. It is intended for on/off control and is not designed to function as a dimmer.
The module will continue to operate as a standard manual switch using your physical wall plate.
The device specifically requires a 2.4GHz network to communicate; please ensure your router is configured to broadcast this frequency.
The module is designed for indoor use; it should be installed in a protected, dry location.
Refer to the specific reset sequence in your manual, which usually involves toggling the connected physical switch multiple times in rapid succession.
Ensure your phone is connected to a 2.4GHz WiFi network and that the device is in pairing mode; perform a factory reset if necessary.
Verify all wiring connections are secure and that the circuit breaker has been reset to the 'on' position.
Check if the connected load exceeds the module's rated capacity and ensure proper ventilation within the wall box.
Installation must be handled with the circuit breaker for the specific room turned off. The module is designed for flush mounting into standard wall boxes, though ensure your wall box has sufficient depth to accommodate both the existing switch wiring and the module itself. After wiring, use the SMART+ app to put the device into pairing mode and connect it to your 2.4GHz WiFi network. For maintenance, keep the module dry and avoid installing it in locations where temperatures exceed the specified operating range to prevent the thermal protection from triggering. Periodically check the app for firmware updates to ensure optimal performance and security.
