Deta Grid Switch - 20 Amp - Double Pole - Marked Ext. Fan - White

You will need a compatible Deta grid frame and a grid rocker to create a complete, functional switch assembly.

No, this switch is specifically marked and designed for extractor fans. Using it for other applications is not recommended and may be unsafe.

The switch is rated for a maximum load of 20 Amps.

Yes, it is a double-pole switch, meaning it disconnects both the live and neutral conductors simultaneously for enhanced safety.

This switch is designed for indoor use. Check product specifications for specific IP ratings if outdoor or high-moisture area use is intended.

The switch has a white finish.

While specific standards are not listed in the product description, Deta products generally comply with relevant UK and European electrical safety standards. Always refer to the product packaging or manufacturer's website for definitive compliance information.

Verify that the circuit breaker is on and that power is supplied to the switch. Check all wiring connections to ensure they are secure and correct. Confirm the extractor fan itself is functioning by testing it directly if possible.

Ensure the switch module is correctly seated in the grid frame and that the frame is securely mounted to the wall box. Check that the rocker is properly attached.

Immediately turn off the power at the breaker. Check the wiring for loose connections. Ensure the load does not exceed the 20-amp rating of the switch. If the issue persists, the switch may be faulty and require replacement.