Best current price£141.60from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£141.60Visit shop Festo 5/3 Exhausted Air Solenoid Valve 1050L/Min 3 - 10Bar/44 - 145Psi - 577261
Visit shop6 offers from £141.60 - £141.72
View price history by clicking the chart icon.
The Festo VSNC-F-P53E-MD-N14-F8 is an air solenoid valve designed for industrial automation and process control. It is ideal for users who require a reliable and versatile 5/3-way valve for pneumatic applications, especially in environments where explosion protection is necessary. Its key benefit is robust performance and certified safety in hazardous areas, with a potential caveat being its specific application focus for NAMUR interfaces.
| Model Part Number | VSNC-F-P53E-MD-N14-F8 |
|---|---|
| Brand | Festo |
The 'E' (exhausted) variant vents air to atmosphere from the cylinder port when de-energized, allowing for faster retraction. The 'U' (pressurized) variant holds pressure in the cylinder port when de-energized, which can be useful for holding a position. The 'C' (closed) variant blocks all ports when de-energized.
Direct mounting is designed for NAMUR interfaces. Use of adapter plates or custom solutions may be required for non-NAMUR actuators, potentially impacting performance and certification.
It is recommended to use filtered, dry compressed air. Water or oil contamination can reduce the lifespan and reliability of the valve. ISO 8573-1 class 4 or better is advisable.
The lifespan depends heavily on the operating conditions, air quality, and duty cycle. However, Festo valves are known for their durability and long service life under appropriate usage.
The rotatable seal is typically adjusted by loosening specific screws on the valve body, rotating the seal assembly to the desired orientation, and then re-tightening the screws evenly. Refer to the specific product manual for detailed instructions.
This valve is designed for compressed air applications within the specified pressure range. It is not intended for vacuum generation or control.
Check electrical connections to the solenoid coil for proper seating and voltage supply. Verify that the air supply pressure is within the 3-10 bar range. Ensure the valve is not physically obstructed.
Check for leaks in the pneumatic lines or actuator. Ensure the air supply is clean and dry, as contamination can restrict flow. Verify that the nominal flow rate is sufficient for the application.
Ensure the valve is correctly wired and energized. Check for debris or damage to the internal seals. If the issue persists, the valve may require replacement.
Verify that pneumatic lines are connected to the correct ports as per the NAMUR standard and valve markings. Double-check electrical energization and de-energization to ensure proper port switching.
Setup: The VSNC-F-P53E-MD-N14-F8 is designed for direct mounting onto a NAMUR interface. Ensure the mounting surface is clean and free of debris. Connect the pneumatic lines to the appropriate ports, noting the numbering convention for supply, cylinder, and exhaust ports. Electrical connections for the solenoid coil should be made according to the specifications provided in the technical documentation, ensuring correct voltage and polarity.
Compatibility: This valve is compatible with standard pneumatic control systems that adhere to the NAMUR mounting standard. Ensure the compressed air supply meets the pressure requirements (3-10 bar) and is clean and dry. The electrical interface for the coil should match the valve's specifications (e.g., voltage).
Care: Regular inspection of pneumatic connections for leaks is recommended. Keep the valve free from excessive dust and dirt. If used in harsh environments, periodic cleaning with a slightly damp cloth may be necessary; avoid using solvents or abrasive cleaners. Ensure the air supply is filtered to prevent internal contamination of the valve.
