100mm Heavy Duty Polyamide Swivel Castor Wheel - Bolt Hole - 200Kg Load Capacity

Each castor has a maximum load capacity of 200kg.

This castor uses a bolt-hole fixing system.

The wheel is made of durable Polyamide (Nylon) with a cast aluminium core.

It is recommended to inspect the castor regularly, clean it as needed, and lubricate the swivel joint if it becomes stiff.

While the castor can roll on various surfaces, it is best suited for hard surfaces like concrete or wood. For carpeted areas, performance may be reduced, and the load capacity should be carefully considered.

The overall height from the bottom of the wheel to the top of the mounting plate is 127mm.

The plate hole diameter is 12.5mm, suggesting compatibility with M12 bolts. Always use appropriate hardware for secure mounting.

Check for any obstructions or debris around the swivel mechanism. Ensure the mounting bolts are not over-tightened, as this can restrict movement. Apply a small amount of grease to the swivel joint.

Inspect the wheel for embedded objects or damage. Clean the wheel surface. Ensure the load is evenly distributed and does not exceed the 200kg capacity.

Verify that you are attempting to mount to a surface prepared for bolt-hole fixings of this size. You may need to drill new holes or use a custom adapter plate if existing holes are incompatible.

Ensure the castor is correctly installed with all bolts securely tightened. Check that the total load does not exceed the 200kg limit for a single castor. Distribute weight as evenly as possible.