U-POL Raptor Black - 4 Litre

U-POL Raptor is a protective coating designed to provide a durable and resilient surface for various applications.

Raptor can be used on a wide range of surfaces, including metal, wood, plastic, and concrete, as long as the surface is properly prepared.

Yes, you will need a RAPTOR application gun. The kit is compatible with both standard and professional application guns.

The surface should be cleaned, sanded, and degreased to ensure proper adhesion. Follow the manufacturer's recommendations for surface preparation.

Yes, U-POL Raptor can be tinted to a variety of colors using the U-POL tinting system.

The number of coats depends on the desired thickness and the application. Typically, two to three coats are recommended.

Drying time varies depending on the temperature and humidity. Refer to the manufacturer's instructions for specific drying times.

Clean the coated surface regularly with soap and water. Avoid using abrasive cleaners or solvents that may damage the coating.

Ensure proper surface preparation by cleaning, sanding, and degreasing before application. Make sure the surface is completely dry and free of contaminants. Ensure the correct mixing ratio of Raptor coating and hardener is used.

Check the application gun for blockages and clean the nozzle. Ensure the air pressure is set to the recommended level. Use the correct viscosity of the Raptor coating.

Ensure the ambient temperature and humidity are within the recommended range. Check the expiration date of the Raptor coating and hardener. Make sure the correct amount of hardener was mixed with the Raptor coating.