Hirschmann Right-angle Connector - 935-980-008-1

The right-angle design allows for easier cable management and space-saving installations, particularly in confined areas, by directing the cable away at a 90-degree angle.

This Hirschmann connector is approved to the DIN EN 175301-803 ISO 4400 standard.

While the connector is dustproof and shockproof, its suitability for direct outdoor exposure depends on the overall system's environmental protection rating. It is designed for robust industrial environments, which may include outdoor applications if properly integrated into a protected system.

The PG9 cable gland is typically designed to accommodate cables with an outer diameter ranging from approximately 4mm to 8mm.

You can clean the connector using a dry or slightly damp cloth. Avoid using abrasive materials or chemical solvents that could damage the connector's housing or seals.

It is ideal for applications subject to vibration, such as heating systems, gas/oil burner controls, industrial machinery, and other devices requiring a robust and reliable connection.

Verify that both connectors are correctly mated and that the mating device meets the DIN EN 175301-803 ISO 4400 standard. Check for any obstructions or damage on the pins or sockets.

Tighten the PG9 cable gland around the cable. Ensure the cable's outer diameter is within the appropriate range for the PG9 gland.

Inspect the wiring within the connector for loose connections. Ensure the connector is adequately protected from vibration if the application demands it. Check the integrity of the mating connector.

Ensure the PG9 cable gland is properly tightened and sealed around the cable. Inspect the connector's seals for damage and replace if necessary.