DeWalt Multi Material Drill Bit 12mm x 153mm - DeWalt-DT6525-QZ

This drill bit can be used on masonry, metal, and wood.

The diameter of this drill bit is 12mm.

The length of this drill bit is 153mm.

Yes, this drill bit is suitable for use in both rotary and percussion drilling modes.

Clean the drill bit after each use and store it in a dry place.

The anti-slip shank prevents the drill bit from rotating in the chuck, ensuring a secure grip.

The tip grind angle is 120 degrees.

Stop drilling immediately, and try reversing the drill to remove the bit. If it's still stuck, try using pliers.

Ensure the bit is properly inserted and the chuck is tightened securely. The anti-slip shank should prevent slippage.

Check the drilling mode and speed. Increase pressure and use percussion mode for masonry. For metal, ensure you're using a low speed and applying steady pressure.

Check the material you are drilling into. If you are drilling into very hard materials, you may need to reduce your drilling speed and apply more pressure. Also, ensure the bit is being cooled properly.