Best current price£14.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£14.75Visit shop B&Q - Pozidriv Double Self-Countersunk Yellow-Passivated Steel Wood Screw (Dia)3.5mm (L)40mmPack Of 500
Visit shop1 offer from £14.75
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals who need reliable fasteners for wood projects. The TurboDrive Pozidriv Screw offers durable construction and a zinc-plated finish for general use, with a caveat that its yellow color may not be suitable for all aesthetic requirements. This pack contains 500 screws, each 40mm long with a 3.5mm diameter, featuring a double countersunk head for a flush finish and a Pozidriv drive for enhanced grip.
| Colour | Yellow |
|---|---|
| Brand | TurboDrive |
You need a Pozidriv screwdriver or drill bit, typically a PZ2 size for these screws.
The yellow zinc plating offers some corrosion resistance, but they are best suited for dry indoor environments. For prolonged outdoor exposure, consider screws with a more robust coating like galvanization or stainless steel.
Pozidriv screws are designed to provide better torque transfer and reduce the chance of the driver bit 'camming out' (slipping out of the screw head), especially when applying significant force.
Yes, these screws are suitable for use in MDF and particle board. Pre-drilling pilot holes is recommended to prevent material damage and ensure a secure fit.
It means the underside of the screw head is shaped to taper into the wood, allowing the head to sit flush with or slightly below the surface without needing to pre-countersink the hole extensively. The 'double' aspect usually refers to a secondary chamfer for a cleaner finish.
This pack contains 500 TurboDrive Pozidriv screws.
Ensure you are using the correct Pozidriv bit (PZ2). Apply firm, consistent pressure directly into the screw head to maintain engagement. Do not overtighten. Try pre-drilling a pilot hole.
Pre-drill a pilot hole slightly smaller than the screw's core diameter. Ensure you are not driving the screw too close to the edge of the wood. Reduce driving torque if using a power drill.
Ensure the countersink area of the wood is adequately prepared for the screw head. Use a countersink bit if necessary. Verify the screw is not hitting an obstruction or is not too long for the material thickness.
Setup: To use these screws, you will need a Pozidriv screwdriver bit (PZ2 is common for this size). Ensure the bit is firmly seated in the screw head before applying torque. For best results, pre-drilling pilot holes in hardwoods or near the edge of any wood can prevent splitting and make driving easier.
Compatibility: These screws are specifically designed for use in wood. They are compatible with most types of timber, plywood, and particle board. The Pozidriv drive requires a matching Pozidriv screwdriver or drill bit. They are not intended for use with metal or masonry.
Care: Store screws in a dry environment to prevent corrosion of the zinc plating over time. Keep the container closed to avoid dust and debris accumulation.
