Best current price£68.59from eBay
Shopping.co.uk recommended and popular offers
eBay£68.59Visit shop DID VX bike X - Ring chain G&B 428 pitch 118 links open +clip lock 100 - 350 ccm
Visit shop17 offers from £68.59 - £104.99
View price history by clicking the chart icon.
The DID 428VX X-Ring chain is engineered for motorcycle enthusiasts and competitive riders who demand peak transmission reliability in both road racing and off-road environments. By utilizing patented X-Ring technology, this chain offers a significant upgrade in wear resistance and efficiency compared to standard O-ring alternatives, though it requires precise installation and regular maintenance to achieve its full service life.
| Model Part Number | 748.94.38 |
|---|---|
| Brand | DID |
While the chain includes a clip, it is highly recommended to use a rivet-style master link for high-performance or racing applications for maximum security.
Lubrication should be applied every 300 to 500 miles, or immediately after riding in wet, muddy, or dusty conditions.
The 428VX is designed for 428-pitch systems; however, always ensure your sprockets are in good condition when installing a new chain to prevent premature wear.
The X-ring design creates a twist that results in two sealing points rather than one, which improves lubrication retention and reduces rotational friction.
No, direct high-pressure water can damage the rubber seals and force debris into the rollers, causing internal damage.
Adjust the axle position using the swingarm tensioner bolts until the correct slack is achieved.
Thoroughly clean the chain with a soft brush and apply fresh chain lubricant, working it into the side plates.
Check chain tension, verify the chain is properly lubricated, and inspect the sprockets for hooked teeth.
Proper installation is vital for the 428VX. Always use a high-quality chain rivet tool to secure the master link, as improper riveting can lead to catastrophic failure. Ensure the chain tension is adjusted to the motorcycle manufacturer's specifications—typically found on the swingarm decal or in the owner's manual—to prevent undue stress on the output shaft bearings.
For maintenance, use a dedicated non-petroleum-based chain cleaner and a high-quality X-Ring compatible lubricant. Avoid using harsh degreasers or high-pressure power washers directly on the chain, as these can force dirt past the X-Rings and deplete the internal grease, drastically reducing the chain's life.
