Oakcrafts - Walnut Flat Head End Grain Plug - 10mm - Brown
Best current price£18.75from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£18.75Visit shop - Oakcrafts10mm Walnut Flat Head End Grain PlugPack Of 50
Visit shopB&Q£18.75Visit shop All Offers
2 offers from £18.75 - £26.75
View price history by clicking the chart icon.
B&Q - Oakcrafts10mm Walnut Flat Head End Grain PlugPack Of 50
Free delivery in 1–3 days
£18.75
Visit shop
- Oakcrafts10mm Walnut Flat Head End Grain PlugPack Of 100Free delivery in 1–3 days£26.75Visit shop →
Product Information
Full details
The Oakcrafts 10mm Flat Head End Grain Plug is an essential finishing component for woodworkers and DIY enthusiasts seeking a professional, seamless look on furniture and cabinetry projects. Designed to fit perfectly into 10mm drilled holes, these end grain plugs offer a superior match for natural timber surfaces, allowing for a flush, clean finish after sanding. While these plugs provide an excellent aesthetic outcome, it is important to note that matching timber species and grain orientation requires careful selection to ensure the plug remains inconspicuous.
All features
| Colour | Brown |
|---|---|
| Brand | Oakcrafts |
Extended Product Information
FAQs
Are these plugs suitable for outdoor furniture?
These plugs are intended for interior woodwork. If used outdoors, ensure they are protected by high-quality, weather-resistant exterior wood finishes.
Can I paint over these plugs?
Yes, once sanded flush and primed, these plugs accept paint as well as the surrounding wood surface.
Do I need to glue the plugs in?
Yes, using a small amount of high-quality wood glue is recommended to ensure the plug remains permanently in place.
Can these be used with non-walnut wood?
Yes, though the natural walnut tone is specifically designed to complement walnut timber. Test on a scrap piece if you intend to use them with contrasting wood species.
What is the best way to trim the plug flush?
A sharp, wide-blade chisel used carefully, or a sanding block with 120-grit paper followed by 220-grit, is the most effective method.
Troubleshooting
Plug sits loosely in the hole
Ensure the drill bit used is exactly 10mm. If the hole is slightly oversized, use a wood filler mixed with sanding dust from the project to tighten the fit.
Plug appears darker than the wood after finishing
End grain absorbs more finish than face grain. Try applying a thin layer of wood sealer to the plug before applying your final stain or oil.
Pros and Cons
Pros
- Provides a seamless, professional finish for screw holes
- End grain design mimics natural wood characteristics
- Standard 10mm size ensures wide compatibility with common drill bits
- Easy to install and sand flush
- Ideal for both fine furniture repair and decorative cabinetry
Cons
- Requires careful grain alignment for the best visual match
- Limited to 10mm diameter holes
- Color variations may occur due to the natural material
Setup, Compatibility & Care
To achieve the best results, use a sharp 10mm drill bit to create a clean, non-jagged hole. Apply a small amount of wood glue to the sides of the plug before inserting it into the hole, ensuring the plug is firmly seated. Once dry, use a sharp chisel or a sanding block to trim the plug flush with the surface. For care, treat the plugged area exactly as you would the rest of your furniture with your chosen finish—whether it is varnish, wax, or oil—to ensure the plug blends in uniformly. Keep these plugs stored in a dry environment to prevent moisture absorption, which could cause them to swell or lose their shape.