Best current price£11.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£11.97Visit shop B&Q - Granite Beige 67.5Cm X 1M Self-Adhesive Vinyl Wrap For Doors And Worktops
Visit shop2 offers from £11.97 - £12.49
View price history by clicking the chart icon.
The D-C-Fix Granite Beige Self Adhesive Vinyl Wrap is designed for DIY enthusiasts and homeowners looking to refresh kitchen worktops, cabinets, and furniture without the high cost of replacement. Its standout benefit is the authentic granite aesthetic combined with a user-friendly, repositionable adhesive that allows for a smooth, professional-grade finish. While it offers excellent durability and moisture resistance, users should note that application requires patience and precision to avoid air bubbles on larger surface areas.
| Model Part Number | 5056525322269 |
|---|---|
| Brand | d-c-fix |
Yes, it is moisture-resistant, making it suitable for bathroom cabinets or vanity units.
It is not designed for direct contact with hot pans or open flames; keep it away from heat sources like stovetops.
The adhesive works best on smooth, flat surfaces. Texture may show through the vinyl or prevent proper adhesion.
Use a hairdryer to apply moderate heat across the surface; this softens the adhesive, allowing you to peel the film off easily.
It is water-resistant and can handle splashes, but it should not be submerged or used in areas with standing water.
Use a pin to prick the bubble and carefully smooth the air out towards the hole with a squeegee or soft cloth.
Use a hairdryer to warm the vinyl, making it more flexible, then hold it in place until it cools to set the shape.
Apply a piece of masking tape to both sides of the corner to help pull the backing paper away from the adhesive film.
To install, start by measuring your surface and cutting the film with a slight overlap. Clean your target surface thoroughly with a degreaser. Peel back a small section of the backing paper and press firmly, smoothing from the center outwards to push out air. For care, keep the surface clean using a damp cloth and mild household detergent. Avoid using abrasive sponges or harsh chemicals that could scratch the finish. For removal, heat the film evenly with a hairdryer to soften the adhesive, then slowly peel back at an angle.
