Best current price£18.73from B&Q
Shopping.co.uk recommended and popular offers
B&Q£18.73Visit shop B&Q - Glue Ultra Gel Control 4G (3 Pack)Shock-Resistant Instant Adhesive For Precise Repairs On MetalRubberWood & Plastic
Visit shop3 offers from £18.73
View price history by clicking the chart icon.
The Loctite Glue Ultra Gel Control 4g (3 Pack) is designed for individuals needing reliable, precise bonding for various home repairs, crafts, and DIY projects. Its key benefit is a shock-resistant, fast-drying gel formula that prevents drips for accurate application on vertical or uneven surfaces, bonding materials like metal, rubber, wood, and plastic. A potential caveat is that it is a permanent adhesive, so careful application is essential.
| Colour | White |
|---|---|
| Brand | Loctite |
It bonds metal, rubber, wood, and most plastics. It is not suitable for polyethylene, polypropylene, PTFE, silicone rubber, fabrics, or paper.
The glue sets within approximately 60 seconds for initial handling, but a full cure and maximum strength are achieved after 24 hours.
No, this product is not recommended for use on surfaces that will be in direct contact with food.
Store the tubes in a cool, dry place away from direct sunlight and heat, ensuring the cap is tightly sealed.
The gel formula is designed to be non-drip, making it easier to apply precisely on vertical or uneven surfaces without running, unlike traditional liquid super glues.
While it creates durable bonds, specific water resistance details are not provided. It is generally suitable for most indoor repair needs.
No, Loctite Glue Ultra Gel Control creates a permanent bond. Once the parts are pressed together, they cannot be easily repositioned.
Ensure the nozzle is not blocked. Carefully clear any dried glue from the tip. Make sure the cap has been fully removed.
Verify that both surfaces were clean, dry, and free of contaminants before application. Ensure sufficient pressure was applied during the bonding period and that the correct materials were being bonded.
Apply a very thin layer of gel to one surface only. Use the precision nozzle to control the amount dispensed. Wipe away excess uncured glue immediately.
Ensure the tube has not been exposed to excessive heat or left open, which can cause premature drying. Store in a cool environment.
Setup: Ensure surfaces to be bonded are clean, dry, and free from dust, oil, or grease. For best results, lightly roughen smooth surfaces with sandpaper. Apply a thin, even layer of gel to one surface. Press the parts together firmly and hold for the recommended time (typically 60 seconds), allowing the bond to set. For maximum strength, allow 24 hours for a full cure.
Compatibility: This glue is suitable for bonding metal, rubber, wood, and most plastics. Avoid using on polyethylene, polypropylene, PTFE, or silicone rubber. It is not recommended for use on fabrics or paper where a flexible bond is needed or on surfaces that will be in direct contact with food.
Care: Store tubes in a cool, dry place away from direct sunlight and heat. Keep the cap tightly sealed to prevent the glue from drying out. Clean any excess uncured glue immediately with a damp cloth. Cured adhesive may be removed by scraping, or by using a commercial adhesive remover (test on an inconspicuous area first).
