T-Cut Ceramic Wax is a hybrid blend of SiO2 and wax which provides tough ceramic protection to pai...T-Cut Ceramic Wax is a hybrid blend of SiO2 and wax which provides tough ceramic protection to paintwork. The hybrid formula creates hydrophobic water beading that forms a shield to protect your paintwork from dirt and grime whilst enhancing the depth of gloss. Easy to use, just spray on and wipe off to leave paintwork with a drag free silky finish, allowing for easier future cleaning. Suitable for use on paintwork, wheels, rubber and plastic trim. Directions: We recommend using 2 quality microfibre cloths, 1 cloth to apply and 1 cloth to buff. 1) Wash car with a good quality shampoo and dry thoroughly. 2) Shake bottle well. 3) Spray sparingly onto a microfibre cloth and apply in a circular motion. 4) Use the second microfibre cloth to remove any excess and buff the finish to a high shine. Do not allow the product to dry on the surface. 5) For best results, allow to cure for a minimum of 2 hours, then apply a second coat. 6) Follow with T-Cut Final Glaze to lock in the shine and enhance the showroom finish. Note: Do not use in hot conditions or direct sunlight. Work on one panel at a time. Spillages can be easily cleaned using a cloth and water. Do not use on windscreens. Do not use on matt or special effect paintwork. Store in an upright position and secure when transported. Key Features: Provides a tough, protective armour shield to paintwork Enhances depth of gloss Creates a silky smooth finish No fuss- Spray on, wipe off Use on paintwork, wheels, rubber and plastic trim If it says T-CUT It Works! Since 1954, T-Cut has been looking after the nation's cars. T-Cut is always asked for by name and is synonymous with removing scratches and restoring vehicle paintwork. The brand today consists of waxes, detailers, and technical restoration products to give your car that special showroom finish. T-Cut is proud to be owned and manufactured in Britain.
T-Cut Ceramic Wax is a hybrid blend of SiO2 and wax which provides tough ceramic protection to paintwork. The hybrid formula creates hydrophobic water beading that forms a shield to protect your paintwork from dirt and grime whilst enhancing the depth of gloss. Easy to use, just spray on and wipe off to leave paintwork with a drag free silky finish, allowing for easier future cleaning. Suitable for use on paintwork, wheels, rubber and plastic trim. Directions: We recommend using 2 quality microfibre cloths, 1 cloth to apply and 1 cloth to buff. 1) Wash car with a good quality shampoo and dry thoroughly. 2) Shake bottle well. 3) Spray sparingly onto a microfibre cloth and apply in a circular motion. 4) Use the second microfibre cloth to remove any excess and buff the finish to a high shine. Do not allow the product to dry on the surface. 5) For best results, allow to cure for a minimum of 2 hours, then apply a second coat. 6) Follow with T-Cut Final Glaze to lock in the shine and enhance the showroom finish. Note: Do not use in hot conditions or direct sunlight. Work on one panel at a time. Spillages can be easily cleaned using a cloth and water. Do not use on windscreens. Do not use on matt or special effect paintwork. Store in an upright position and secure when transported. Key Features: Provides a tough, protective armour shield to paintwork Enhances depth of gloss Creates a silky smooth finish No fuss- Spray on, wipe off Use on paintwork, wheels, rubber and plastic trim If it says T-CUT It Works! Since 1954, T-Cut has been looking after the nation's cars. T-Cut is always asked for by name and is synonymous with removing scratches and restoring vehicle paintwork. The brand today consists of waxes, detailers, and technical restoration products to give your car that special showroom finish. T-Cut is proud to be owned and manufactured in Britain.