Bosch Diamond cutting disc Standard for Abrasive - Bosch Professional - 2608602616

This disc is designed for cutting all sorts of abrasive materials, including concrete, brick, stone, and asphalt.

The bore diameter is 22.23 mm, which is standard for many angle grinders.

You can use this disc with angle grinders that have a 22.23 mm bore and accept standard locking nuts. Always refer to your angle grinder's manual for compatibility.

The cutting width is 1.6 mm.

Store the disc in a dry environment to prevent rust and keep it clean from debris. Avoid storing it in areas with high humidity.

It refers to the specific arrangement and quality of the diamond particles embedded in the disc's cutting edge, designed for efficient and durable material removal.

This disc is optimized for abrasive materials. While it may cut some metals, it is not specifically designed for them and may wear faster or perform less effectively than a dedicated metal cutting disc.

Ensure the disc is securely mounted and the locking nut is properly tightened. Check if the disc itself is damaged or warped. Verify that the angle grinder's spindle is clean and undamaged.

Confirm you are using the correct disc for the material. Ensure adequate pressure is applied without forcing the tool. Check for any obstructions in the cut line or if the disc's diamond segments are worn down.

Ensure you are cutting appropriate materials. Excessive force or dry cutting can accelerate wear. Allow the disc to cool periodically. Check for proper mounting and tool speed.