Best current price£18.95from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£18.95Visit shop Pro-Kleen (Matt, 3) Multi-Surface Clear Lacquer Spray
Visit shop
B&Q£19.95Visit shop B&Q - Clear Matt Lacquer Spray 400Ml X3 Protects & Seals Fast Drying Formula
Visit shop4 offers from £18.95 - £19.95
View price history by clicking the chart icon.
This Pro-Kleen Lacquer Spray is designed for DIY enthusiasts and professionals seeking to protect a wide range of surfaces from scratches, damage, and fading. Its key benefit is providing a durable, clear matt protective coating that maintains the original appearance of the surface. A potential caveat is ensuring proper ventilation during application due to its spray nature. The spray offers weather resistance, UV protection, and can be used as a base coat or sealant on wood, ceramic, plastic, masonry, and painted surfaces. Its non-yellowing formula ensures a consistent finish, and it dries to the touch quickly.
| Brand | Pro-Kleen |
|---|
This lacquer spray is suitable for wood, ceramic, painted surfaces, plastic, masonry, and plaster.
The spray is touch dry in approximately 15-30 minutes, allowing for quick re-coating.
No, the formula is non-yellowing and designed to leave a clear matt finish without altering the original appearance of the surface.
Yes, it is weather-resistant and provides UV protection, making it ideal for outdoor surfaces like garden furniture.
The surface must be clean, dry, and free from dust, grease, and other contaminants for optimal adhesion.
Hold the can upright about 25-30 cm away and apply in thin, even coats using a sweeping motion. Ensure good ventilation.
After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent clogging.
Shake the can more vigorously. Ensure the nozzle is not clogged. If clogged, turn the can upside down and spray to clear. Test on a scrap piece of material.
Sprayed too close to the surface or applied too heavily. Remove runs with a cloth if wet, or sand lightly and reapply in thin, even coats from the correct distance.
Surface was not properly prepared (not clean, dry, or free of contaminants). Ensure the surface is thoroughly cleaned and dry before application.
Applied in very cold or humid conditions. Ensure application occurs within recommended temperature and humidity ranges. If already applied, allow more time in a warmer, drier environment.
Setup: Ensure the surface is clean, dry, and free from dust, grease, and contaminants before application. Shake the can vigorously for at least two minutes before use. Test spray on an inconspicuous area first.
Application: Hold the can upright, approximately 25-30 cm from the surface. Apply in thin, even coats, using a sweeping motion. Avoid over-spraying. Allow 15-30 minutes between coats. Ensure good ventilation during application and drying.
Compatibility: Suitable for use on wood, ceramic, painted surfaces, plastic, masonry, and plaster. Not recommended for use on flexible materials or surfaces not intended for coating.
Care: Store the can in a cool, dry place away from direct sunlight and heat. After use, turn the can upside down and spray for a few seconds to clear the nozzle.
